Development of decorative coatings for facial ceramic products

Authors

  • Юлия Вячеславовна Харыбина Service chief designer PC «RPC «Radiy» 29 Geroyiv Stalingrada Str. 25009 Kirovograd, Ukraine, Ukraine
  • Олег Ярославович Питак National Technical University "Kharkiv Polytechnic Institute" 21 Frunze Str. 61002 Kharkov, Ukraine, Ukraine
  • Инна Вячеславовна Питак National Technical University "Kharkiv Polytechnic Institute" 21 Frunze Str. 61002 Kharkov, Ukraine, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.14813

Keywords:

glazed ceramic products, facial tile, industrial wastes, performance criteria

Abstract

Nowadays an increase of construction requires the development of building materials industry.

The objective of the study is to develop the structure of decorative coatings for facial ceramic products with high performance criteria.

The experimental studies have demonstrated the possibility to obtain glazed surfaces for ceramic products, namely, the facial tile with high micro-hardness and wear resistance, as well as with small amount of the components of charge on the basis of industrial wastes such as glass wastes (breakage of bottles and jars), granite wastes and as a dye - bauxite sludge.

The dependence of the properties of glazed ceramic coatings on the amount of bauxite sludge was determined. The optimum calcination temperature of the coatings and structure of the charge were chosen, which promote the production of glazed ceramic coatings with high performance criteria

Author Biographies

Юлия Вячеславовна Харыбина, Service chief designer PC «RPC «Radiy» 29 Geroyiv Stalingrada Str. 25009 Kirovograd, Ukraine

Process Engeer

Technology department management and maintenance of production

Олег Ярославович Питак, National Technical University "Kharkiv Polytechnic Institute" 21 Frunze Str. 61002 Kharkov, Ukraine

Assistant

Department of chemical engineering and industrial ecology

Инна Вячеславовна Питак, National Technical University "Kharkiv Polytechnic Institute" 21 Frunze Str. 61002 Kharkov, Ukraine

Docent

Department of chemical engineering and industrial ecology

References

  1. Питак, О.Я. Цветные износостойкие покрытия по керамике на основе системы ZnOMgOAl2O3 SiO2 с использованием техногенного сырья [Текст]: дис. … канд. техн. наук / О.Я. Питак. – Х., 2006. – 150 с.
  2. Крупа, А.А. Химическая технология керамических материалов [Текст] : учеб, пособие / А.А. Крупа, В.С. Городов, К: Вища школа, 1990.  399с.
  3. Бек, Ю.М. Железосовместимые глушеные глазури на основе отходов производства [Текст] : автореф. дис. ... канд. техн. наук: 05.17.11 / Ю.М. Бек; [Львов. гос. политехн. ун-т.] – Львов, 1997. – 20 с.
  4. Будников, П.П. Технология керамических изделий [Текст] / П.П. Будников, А.С. Бережной, И.А. Булавин, и др. – М.: Государственное издательство строительной литературы, 1946. – 523 с.
  5. Пітак, О.Я. Кольорові склокристалічні покриття [Текст]. 1а Всеукраїнська конференція студентів, аспірантів та молодих вчених з хімії та хімічної технології / О.Я. Пітак, К. В. Подчасова, О.А. Кашук, − Київ, 2006. – С. 159.
  6. Питак, О.Я. Об использовании отходов производства катализаторов для окрашивания глазуруй [Текст] / О.Я. Питак, С.В. Курочка, Н.А. Гринева. 5я Всеукраинская конференция студентов и аспирантов «Сучасні проблеми хімії» - Київ, 2004. – С. 39.
  7. Анпилов, М.А. Нефриттованные глазури с повышенным содержанием кристаллической фазы и улучшенными физико−механическими свойствами. [Текст]: автореф. дис. ... канд. техн. наук. – М.: НИИстройкерамики, 1986. – С. 16.
  8. Рыщенко, М. И. "Повышение эксплуатационных свойств керамики" [Текст]: монографія / М.И. Рыщенко, Г.В. Лисачук, Харьков: ХДПУ, Вища школа, 1987.  140 с.
  9. Гринь, С.А. Влияние соединений ванадия на окружающую среду / Гринь С.А., Питак И.В., Кузнецов П.В. // Східно-Європейський журнал передових технологій – Х.: Технологічний центр, 2012, − № 6/10 (60) – С. 9–13.
  10. Питак, И.В. Основы теории и расчета деталей роторного аппарата [Текст] / И.В. Питак // Восточно-Европейский журнал передовых технологий. – Х.: Технологічний центр – 2012. − №4/7(58), 2012. – С. 14-18.
  11. Pitak, O. (2006). Colored wear-resistant coatings for ceramics based on the system ZnO−MgO−Al2O3−SiO2, using man-made materials. Ph.D. dissertation work, National Technical University “Kharkiv Polytechnic Institute”.
  12. Krupa, A., & Gorodov, V. (1990). Chemical engineering ceramic materials. Kiev, Vyshcha shkola, 399.
  13. Beck, J. (1997). Iron-content jamming enemals based glaze waste. Ph.D. dissertation work thesis, Lviv State Polytechnic University.
  14. Budnikov, P., Berezhnoy, A., Bulavin, I., Kukolev, G., Perevalov, V., Melyansky, I. (1946). Technology ceramic products: State publishing construction literature.
  15. Pіtak, O., Podchasova, K., & Kashuk, O. (2006). Glass colored coating. Proceedings of the 1st National Conference of Students and Young Scientists in chemistry and chemical engineering, 159.
  16. Pitak, O., Kurochka, S., & Grineva, N. (2004).On the use of waste catalysts for coloring glazes. Proceedings of the 5th Ukrainian Conference of students and Young Scientists: Modern Problems of chemistry, 39.
  17. Anpilov, M. (1986). Crude enemals glaze with a high content of the crystalline phase and improved physical and mechanical properties. Ph.D. dissertation work thesis, Kharkiv Polytechnic Institute.
  18. Ryschenko, M., & Lisachuk, G. (1987). Improving the performance properties of ceramics. Kharkiv: HDPU, Vyshcha shkola.
  19. Grin, S., Pitak, I., & Kuznetsov P. (2012). Effect of vanadium compounds on the environment. East-European Journal of advanced technologies, Kharkiv: Technological centre, 60, 9–13.
  20. Pitak,I. (2012). Fundamentals of the theory and design of rotary machine parts. East-European Journal of advanced technologies, Kharkiv: Technological centre, 58, 14-18.

Downloads

Published

2013-06-19

How to Cite

Харыбина, Ю. В., Питак, О. Я., & Питак, И. В. (2013). Development of decorative coatings for facial ceramic products. Eastern-European Journal of Enterprise Technologies, 3(6(63), 56–59. https://doi.org/10.15587/1729-4061.2013.14813

Issue

Vol. 3 No. 6(63) (2013): Technologies of organic and inorganic substances

Section

Technology organic and inorganic substances

License

Copyright (c) 2014 Юлия Вячеславовна Харыбина, Олег Ярославович Питак, Инна Вячеславовна Питак

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.