The heating candles connection-disconnection control with inverse conection in a passenger car

Authors

  • Анатолій Володимирович Васильєв Poltava National Technical Yuri Kiondratiuk University Pershotravnevii 24, Poltava, 36000, Ukraine
  • Станіслав Вячеславович Попов Poltava National Technical Yuri Kiondratiuk University Pershotravnevii 24, Poltava, 36000, Ukraine
  • Сергій Миколайович Сокальський Poltava National Technical Yuri Kiondratiuk University Pershotravnevii 24, Poltava, 36000, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.14822

Keywords:

Heating candles, diesel engine, indication of working order, diagnostics, operating mode, the connection-disconnection

Abstract

The heating candles play important role in start-up of diesel engine especially in winter time. However, not enough attention is paid to the diagnostic process without usage of any additional equipment. For the first time the stationer diagnostic equipment is proposed. This equipment is based on the control block of connection –disconnection of the heating candles; it obtains possibility to indicate the running conditions of the heating candles and it is located in the engine of a passenger car. The diagnostic equipment is located on the base of the connection group. It provides opportunity to monitor running conditions of all heating candles simultaneously and each one independently. In this paper we present the electric scheme of the equipment and the procedure of it rigging into a passenger car. Moreover, the running condition in different temperature conditions is described. The method of disconnection of the diagnostic equipment in a summer time, when it is not needed, is proposed too. So, the usage of the diagnostic equipment, provides opportunity to increase time of heating candles exploitation and to decrease the time for the diagnostic process. In addition, convenient method of it usage is proposed: a light indicator is placed in a salon of a car, and gives opportunity to control running order of the heating candles during each start-up of an engine

Author Biographies

Анатолій Володимирович Васильєв, Poltava National Technical Yuri Kiondratiuk University Pershotravnevii 24, Poltava, 36000

Associate Professor

The Chair of Manufacturing Engineering

Станіслав Вячеславович Попов, Poltava National Technical Yuri Kiondratiuk University Pershotravnevii 24, Poltava, 36000

Associate Professor

The Chair of Manufacturing Engineering

Сергій Миколайович Сокальський, Poltava National Technical Yuri Kiondratiuk University Pershotravnevii 24, Poltava, 36000

Student

Department of building machines and equipment

References

  1. Raheman, H., Diesel engine emissions and performance from blends of karanja methyl ester and diesel / H. Raheman., A.G. Phadatare// Journal Biomass and Bioenergy – 2004 – v.27, №4 – p. 393-397.
  2. Bennett, S. Modern Diesel Technology: Diesel Engines / S. Bennett, –NJ.: Cengage Leurning, 2009. – 342 p.
  3. Sazhko, V.А. Structure and operation of vehicles / V.А. Sazhko. – K.: Caravel, 2009. – 400 р.
  4. Pfahl, U., Self-ignition of diesel-relevant hydrocarbon-air mixtures under engine conditions / U. Pfahl, K. Fieweger, G. Adomeit// Journal Symposium (International) on Combustion – 1996- v.26, №1 – p.781-789.
  5. Yu, Ming-Li, Identification of organic compounds on diesel engine soot/ Ming-Li Yu, R. A. Hites // Journal Analytical chemistry – 1981 – v.53, №7 – p. 951-954.
  6. Harris, S. J., Signature size distributions for diesel and gasoline engine exhaust particulate matter/ S. J. Harris, M.M. Maricq// Journal of Aerosol Science – 2001 – v.32, №6 – p. 749-764.
  7. Building Mechanization. Winter operation of building machinery. SR 12-104-2002, – Saint-Petersburg :Siberian University publishing house, 2007. – 48 p.
  8. Diesel engine ZМZ-514.10. Design. Service. Repair, – Saint-Petersburg: Carconsult, 2008.– 64 р.
  9. Bodnev A.G. Device, the operation and technical maintenance of cars / А.G. Bodnev, V.М. Dagovich, – М.: Transport, 1974. – 254 p.
  10. Yataro, W. Studies on the Penetration of Fuel Spray in a Diesel Engine/ W.Yataro, F. Masary, A. Tatso// Bulletin of JSME – 1960 – v.9,№3 – p. 123-130.
  11. Raheman, H., Phadatare, A.G.(2004). Diesel engine emissions and performance from blends of karanja methyl ester and diesel .Journal Biomass and Bioenergy , 27(4), 393-397.
  12. Bennett, S. (2009). Modern Diesel Technology: Diesel Engines. New Jersey, USA : Cengage Leurning .
  13. Sazhko, V.А.(2009). Structure and operation of vehicles . Kiev, Ukraine: Caravel .
  14. Pfahl, U., Fieweger, K. , Adomeit, G. (1996). Self-ignition of diesel-relevant hydrocarbon-air mixtures under engine conditions Journal Symposium (International) on Combustion ,26(1) ,781-789.
  15. Yu, Ming-Li , Hites, R. A. (1981). Identification of organic compounds on diesel engine soot. Journal Analytical ,53(7) , 951-954.
  16. Harris, S. J., Maricq, M.M. (2001).Signature size distributions for diesel and gasoline engine exhaust particulate matter. Journal of Aerosol Science – ,32(6) , 749-764.
  17. (2007). Building Mechanization. Winter operation of building machinery. SR 12-104-2002. Saint-Petersburg , Russia:Siberian University publishing house.
  18. (2008). Diesel engine ZМZ-514.10. Design. Service. Repair. Saint-Petersburg, Russia: Carconsult.
  19. Bodnev A.G. (1974). Device, the operation and technical maintenance of . Мoskva, Russia: Transport .
  20. Yataro, W., Masary, F., Tatso, A. (1960).Studies on the Penetration of Fuel Spray in a Diesel Engine.Bulletin of JSME ,9(3) , 123-130.

Downloads

How to Cite

Васильєв, А. В., Попов, С. В., & Сокальський, С. М. (2013). The heating candles connection-disconnection control with inverse conection in a passenger car. Eastern-European Journal of Enterprise Technologies, 3(7(63), 41–43. https://doi.org/10.15587/1729-4061.2013.14822

Issue

Section

Applied mechanics