Regulation of life cycle of software

Authors

  • Надія Феліксівна Казакова Odessa State Economic University st. Preobrazhenskaya, 8, Odessa, Ukraine, 65082, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.14854

Keywords:

life cycle, software, standard, profile, standardization

Abstract

The article regards general principles of standardization of the lifecycle of software. These principles are one of the most effective tools in dealing with orders, purchasing, development, operation and maintenance of software. The article presents the analysis of standardized approaches set in the international and national standards, including the standards in force of the USSR. It is shown that when analyzing the life cycle of software one should take into account that the GOST R ISO / IEC 12207, which is taken as a basis, has two significant advantages. Firstly, this standard has a definite orientation as to the organization of activity (rather than the specific details of the results of this activity). In this, it is fully corresponds to all modern standards, as well as to other techniques and approaches to work organization. Secondly, the selected standard provides a high degree of adaptability of organization of work. It permits to take into account the dynamics of modification of increasing requirements to projects and systems, which inherent to the present state of the development of the software.

Author Biography

Надія Феліксівна Казакова, Odessa State Economic University st. Preobrazhenskaya, 8, Odessa, Ukraine, 65082

Ph.D., Associate Professor

Department of Information Systems in Economics

References

  1. Рогозін, Є. О. Моделювання та алгоритмізація процесу проектування програмних систем захисту інформації [Текст] : дис. ... докт. техн. наук / Є. О. Рогозін. – Воронеж, 2006. – 327 с.
  2. Васютович, В., Самотохин, С., Никифоров, Г. Регламентация жизненного цикла программных средств [Текст] / В. Васютович, C. Самотохин, Г. Никифоров // Директор информационной службы. – М. : Открытые системы. – 2000. – №7-8. – С. 11-19.
  3. Международные стандарты: ISO (ИСО), IEC (МЭК), ГОСТ Р, ДСТУ ISO [Електронний ре¬сурс] // Портал : Управление качеством. – Режим дос-тупу www/ URL : http://www.klubok.net/Downloads.html. – Заголовок з екрану, доступ вільний, 18.05.2013.
  4. Методика разработки профессиональных стандартов [Електронний ре¬сурс] // Портал : без назви. – Режим дос¬тупу www/ URL : http://www.agpu.net/ umu/UMO/metod.../Metodika_razrabotki_PS.doc. – Заголовок з контейнера, доступ вільний, 18.05.2013.
  5. Стандарты ИСО в области системной и программной инженерии [Електронний ре¬сурс] // Портал : PhiloSoft. – Режим дос¬тупу www/ URL : http://www. philosoft.ru/iso.zhtml. – Заголовок з екрану, доступ вільний, 16.05.2013.
  6. Понятие базового стандарта и профиля [Електронний ре¬сурс] // Пор-тал : без назви. – Режим дос¬тупу www/ URL : http:// www.theory-a.ru/arh_i_seti_evm _1/lek14_4.html‎. – Заголовок з екрану, доступ вільний, 12.05.2013.
  7. ГОСТ Р ИСО/МЭК 12207-99. Информационная технология. Процессы жиз¬ненного цикла программных средств [Електронний ре¬сурс] // Портал : без назви. – Режим дос¬тупу www/ URL : http://www.vgipukuleva.files.wordpress. com/.../d0b3d0bed181d182-iso12207.doc. – Заголовок з контейнера, доступ вільний, 18.05.2013.
  8. ГОСТ Р ИСО/МЭК 12207-99: ГОСТы и нормативы [Електронний ре-сурс] // Портал : без назви. – Режим дос¬тупу www/ URL : http://www.docload.ru/ Basesdoc/38/38418/. – Заголовок з екрану, доступ ві-льний, 13.05.2013.
  9. Жизненный цикл программного обеспечения [Електронний ре¬сурс] // Портал : ПИЭ-Wiki. – Режим дос¬тупу www/ URL : http://wiki.mvtom.ru/index. php/Жизненный_цикл_программного_обеспечения. – Заголовок з екрану, доступ вільний, 13.05.2013.
  10. Липаев, В. В. Профили стандартов жизненного цикла программных средств доступа [Текст] / В. В. Липаев // Jet Info. – М. : Джет Инфо Паблишен. – 2005. – №12 (151). – С. 2-19.
  11. Rogozin, E. A. (2006). Modeling and algorithmic design process of software systems for information. Diss. of Doctor of Technical Sciences, Voronezh, Russia, 327 p.
  12. Vasyutovich, B., Samotohin, S., Nikiforov, G. (2000). The regulation of the software life cycle. Jornal «Chief Information Officer», #7-8, p. 11-19.
  13. International standards : ISO (ISO), IEC (IEC), IEC, ISO DSTU [E-resource]. (2013). http://www.klubok. net/Downloads.html.
  14. The methodology of the professional standards [E-resource]. (2013). http:// www.agpu.net/umu/UMO/metod.../Metodika_razrabotki_PS.doc.
  15. ISO standards in the field of systems and software engineering [E-resource]. (2013). http://www.philosoft.ru/iso.zhtml.
  16. The notion of a basic standard and profile [E-resource]. (2013). http://www. theory-a.ru/arh_i_seti_evm_1/lek14_4. html.
  17. ISO/IEC 12207-99. Information technology. The processes of the software life cycle [E-resource]. (2013). http://www. vgipuku-leva.files.wordpress.com/.../d0b3 d0bed181d182-iso12207.doc.
  18. ISO/IEC 12207-99: State Standards and Regulations [E-resource]. (2013). http://www.docload.ru/Basesdoc/38/38418/.
  19. The life cycle of the software [E-resource]. (2013). http://wiki.mvtom.ru/index.php/The_life_cycle_of_software.
  20. Lipayev, V. (2005). Profiles standards of software life cycle access. Jornal «Jet Info», #12(151), p. 2-19.

Downloads

Published

2013-06-19

How to Cite

Казакова, Н. Ф. (2013). Regulation of life cycle of software. Eastern-European Journal of Enterprise Technologies, 3(10(63), 8–12. https://doi.org/10.15587/1729-4061.2013.14854

Issue

Vol. 3 No. 10(63) (2013): APPLIED INFORMATION TECHNOLOGY

Section

Applied information technology and management systems in the industry

License

Copyright (c) 2014 Надія Феліксівна Казакова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.