Development of dimensionally stable structures of multilayer pipelines and cylindrical pressure vessels from carbon fiber reinforced plastic

Authors

DOI:

https://doi.org/10.15587/1729-4061.2018.150027

Keywords:

composites, carbon fiber reinforced plastic, carbon fibers, reinforcement schemes, pipeline designs, dimensional stability, elastic deformations

Abstract

In the framework of the momentless theory of cylindrical thin shells, the elastic deformation of multilayer pipes and pressure vessels is investigated. It is assumed that the pipes and pressure vessels are made by two-way spiral winding of carbon fiber reinforced plastic tape on a metal mandrel.

The analysis of the dependences of elastic deformations on the reinforcement angles is performed. The relations for axial and circumferential deformations of the wall, depending on the structure of the layer package, reinforcement angles under static loading are obtained. The separate and combined effect of internal pressure and temperature is considered. For the separate effect of loads, the graphs of deformations against the winding angle are plotted.

Composite pipes made of KMU-4L carbon fiber reinforced plastic, as well as composite metal-composite pipes, are investigated. The results obtained for thermal loads are in good agreement with the data of the known experiment and solution. Depending on the load parameters, composite and metal-composite structures with dimensionally stable properties are determined.

It is shown that dimensionally stable structures can be used to solve the problem of compensation of elastic deformations of pipelines. For this purpose, using the ASCP software package, the variant analysis of model structures is performed. By the comparative analysis of the three versions of the structure, layer package structures and reinforcement schemes, ensuring a significant reduction of loads on the supporting elements are obtained. On the example of a pipeline with a flowing fluid, it is shown that the use of dimensionally stable multilayer pipes makes it possible to eliminate bending deformations and significantly reduce the level of working forces and stresses.

Dimensionally stable composite multilayer pipes open up new approaches to the design of pipelines and pressure vessels. It is possible to create structures with predetermined (not necessarily zero) displacement fields, consistent with the fields of the initial technological displacements, as well as with the displacements of conjugate elastic elements and equipment when the operating mode changes. The scope of such structures is not limited to "hot" pipes. The results can be used in cryogenic engineering

Author Biographies

Yurii Loskutov, Volga State University of Technology Lenina ave., 3, Yoshkar-Ola, Russia, 424000

PhD, Associate Professor

Departament of Strength of Materials and Applied Mechanics

Alex Baev, Volga State University of Technology Lenina ave., 3, Yoshkar-Ola, Russia, 424000

PhD, Associate Professor

Department of radio engineering and biomedical systems

Leonid Slavutskii, Chuvash State University named after I. N. Ulyanov Moscowskiy ave., 15, Cheboksary, Russia, 428015

Doctor of Physical and Mathematical Sciences, Professor

Department of Automation and Control in Technical Systems

Gubeydulla Yunusov, Mari State University Lenina sq., 1, Yoshkar-Ola, Russia, 424000

Doctor of Technical Sciences, Professor

Department of mechanization of production and processing of agricultural products

Michael Volchonov, Kostroma State Agricultural Academy Training Town, 34, Karavaevo village, Kostroma region, Russia, 156530

Doctor of Technical Sciences, Professor

Department of technical systems in agro-industrial complex

Vladimir Medvedev, Chuvash State Agricultural Academy K. Marksa str., 29, Cheboksary, Russia, 428000

Doctor of Technical Sciences, Professor

Department of transport-technological machines and complexes

Petr Mishin, Chuvash State Agricultural Academy K. Marksa str., 29, Cheboksary, Russia, 428000

Doctor of Technical Sciences, Professor

Department of transport-technological machines and complexes

Sergey Alatyrev, Chuvash State Agricultural Academy K. Marksa str., 29, Cheboksary, Russia, 428000

Doctor of Technical Sciences, Associate Professor

Department of operation of transport-technological machines and complexes

Petr Zaitsev, Chuvash State Agricultural Academy K. Marksa str., 29, Cheboksary, Russia, 428000

Doctor of Technical Sciences, Professor

Department of mechanization, electrification of automation of agricultural production

Mikhail Loskutov, Volga State University of Technology Lenina ave., 3, Yoshkar-Ola, Russia, 424000

Engineer

Center for Fundamental Education

References

  1. Kulikov, Yu. A. (1993). Zhidkostnye truboprovody: Chislennoe issledovanie napryazhenno-deformirovannogo sostoyaniya, inducirovannogo stacionarnym vnutrennim potokom. Raschety na prochnost', 33, 119–131.
  2. Li, R., Cai, M., Shi, Y., Feng, Q., Liu, S., Zhao, X. (2016). Pipeline Bending Strain Measurement and Compensation Technology Based on Wavelet Neural Network. Journal of Sensors, 2016, 1–7. doi: https://doi.org/10.1155/2016/8363242
  3. Solomonov, Yu. C., Georgievskiy, V. P., Nedbay, A. Ya., Andryushin, V. A. (2014). Prikladnye zadachi mekhaniki kompozitnyh cilindricheskih obolochek. Moscow: FIZMATLIT, 408.
  4. Vasiliev, V. V., Gurdal, Z. (1999). Optimal Design: Theory and Application to Materials and Structures. CRC Press, 320.
  5. Zinov'ev, P. A.; Vasil'ev, V. V., Protasov, V. D. (Eds.) (1992). Termostabil'nye struktury mnogosloynyh kompozitov. Mekhanika konstrukciy iz kompozicionnyh materialo. Moscow, 193–207.
  6. Slyvynskyi, I., Sanin, А. F., Kondratiev, A., Kharchenko, M. (2014). Thermally And Dimensionally Stable Structures Of Carbon-Carbon Laminated Composites For Space Applications. 65th International Astronautical Congress. Toronto, Canada. Available at: https://www.researchgate.net/publication/295549483_THERMALLY_AND_DIMENSIONALLY_STABLE_STRUCTURES_OF_CARBON-CARBON_LAMINATED_COMPOSITES_FOR_SPACE_APPLICATIONS
  7. Bitkin, V. E., Zhidkova, O. G., Komarov, V. A. (2018). Сhoice of materials for producing dimensionally stable load-carrying structures. VESTNIK of Samara University. Aerospace and Mechanical Engineering, 17 (1), 100–117. doi: https://doi.org/10.18287/2541-7533-2018-17-1-100-117
  8. Kulikov, Yu. A., Loskutov, Yu. V. (2000). Razmerostabil'nye konstrukcii cilindricheskih sosudov davleniya i truboprovodov iz mnogosloynyh kompozitov. Mekhanika kompozicionnyh materialov i konstrukciy, 6 (2), 181–192.
  9. Datashvili, L. (2010). Multifunctional and dimensionally stable flexible fibre composites for space applications. Acta Astronautica, 66 (7-8), 1081–1086. doi: https://doi.org/10.1016/j.actaastro.2009.09.026
  10. Smerdov, A. A., Tairova, L. P., Timofeev, A. N., Shaydurov, V. S. (20060. Metodika proektirovaniya i eksperimental'noy otrabotki razmerostabil'nyh trubchatyh sterzhney iz ugleplastika. Konstrukcii iz kompozicionnyh materialov, 3, 12–23.
  11. Aydin, L., Aydin, O., Artem, H. S., Mert, A. (2016). Design of dimensionally stable composites using efficient global optimization method. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 146442071666492. doi: https://doi.org/10.1177/1464420716664921
  12. Evans, P., Dapino, M., Hahnlen, R., Pritchard, J. (2013). Dimensionally Stable Optical Metering Structures With NiTi Composites Fabricated Through Ultrasonic Additive Manufacturing. Volume 1: Development and Characterization of Multifunctional Materials; Modeling, Simulation and Control of Adaptive Systems; Integrated System Design and Implementation. doi: https://doi.org/10.1115/smasis2013-3204
  13. Sairajan, K. K., Nair, P. S. (2011). Design of low mass dimensionally stable composite base structure for a spacecraft. Composites Part B: Engineering, 42 (2), 280–288. doi: https://doi.org/10.1016/j.compositesb.2010.11.003
  14. Spannage, R., Sanjuan, J., Guzmán, F., Braxmaier, C. (2017). Dimensional Stability Investigation of Low CTE Materials at Temperatures From 140 K To 250 K Using a Heterodyne Interferometer. 68th International Astronautical Congress. Available at: https://www.researchgate.net/publication/320945003_DIMENSIONAL_STABILITY_INVESTIGATION_OF_LOW_CTE_MATERIALS_AT_TEMPERATURES_FROM_140_K_TO_250_K_USING_A_HETERODYNE_INTERFEROMETER
  15. Zinov'ev, P. A.; Vasil'ev, V. V., Tarnopol'skiy, Yu. M. (Eds.) (1990). Prochnostnye, termouprugie i dissipativnye harakteristiki kompozitov. Kompozicionnye materialy. Moscow, 232–267.
  16. Arzamasov, B. N., Brostrem, V. A., Bushe, N. A. et. al.; Arzamasov, B. N. (Ed.) (1990). Konstrukcionnye materialy. Moscow: Mashinostroenie.
  17. Loskutov, Yu. V. (2013). Pryamolineyniy konechniy element dlya rascheta kompozitnyh truboprovodov. Vestnik Povolzhskogo gosudarstvennogo tekhnologicheskogo universiteta. Seriya: Les. Ekologiya. Prirodopol'zovanie, 4 (20), 42–49.
  18. Wang, S., Brigham, J. C. (2012). A computational framework for the optimal design of morphing processes in locally activated smart material structures. Smart Materials and Structures, 21 (10), 105016. doi: https://doi.org/10.1088/0964-1726/21/10/105016

Downloads

Published

2018-12-10

How to Cite

Loskutov, Y., Baev, A., Slavutskii, L., Yunusov, G., Volchonov, M., Medvedev, V., Mishin, P., Alatyrev, S., Zaitsev, P., & Loskutov, M. (2018). Development of dimensionally stable structures of multilayer pipelines and cylindrical pressure vessels from carbon fiber reinforced plastic. Eastern-European Journal of Enterprise Technologies, 6(7 (96), 32–38. https://doi.org/10.15587/1729-4061.2018.150027

Issue

Section

Applied mechanics