Analysis of properties of epoxy compositions that operate in contact with water and oil products

Authors

DOI:

https://doi.org/10.15587/1729-4061.2018.150764

Keywords:

epoxy-rubber resin, zeolite, furfural, experimental statistical model, Monte-Carlo method, compromise optimization

Abstract

We modified epoxy resin-based polymer solutions to increase durability in aggressive environments and to reduce costs. We achieved the objective via filling them with the multifractional mineral frame and modification with zeolite and furfural. We varied a content of furfural, a total content of the mineral frame and a proportion of individual components in the frame. The investigated compositions should work under conditions of influence of mixtures of water with oil products and other agents (in elements of structures for the transport service). We determined properties of compositions after exposure separately in air, in water and in two types of oil.

We applied an iterative procedure of random scanning of fields of material properties in five coordinates of varying factors in search for optimal compositions. We studied property fields using experimental statistical models obtained in field experiments. ES models serve to implement calculation experiments using the Monte Carlo method.

We confirmed the possibility for determining the optimal (by the set of criteria) multicomponent polymer compositions for different operating conditions using an iterative procedure of random scanning of property fields.

We obtained compositions for repair and protection of structures, which are in contact with water: paste (reduced viscosity composition without sand) and solution (with reduced epoxy resin consumption). We used compositions that ensure the preservation of the required properties of a protective solution after prolonged exposure to mixtures of water with oil products in the complete overhaul of railway crossing flooring

Author Biographies

Anatoliy Gara, Odessa State Academy of Building and Architecture Didrikhsona str., 4, Odessa, Ukraine, 65029

PhD, Associate Professor

Department of production of building products and structures

Alexander Gara, Odessa State Academy of Building and Architecture Didrikhsona str., 4, Odessa, Ukraine, 65029

PhD, Professor

Department of processes and apparatuses, technology of building materials

Svetlana Sukhanova, Odessa State Academy of Building and Architecture Didrikhsona str., 4, Odessa, Ukraine, 65029

PhD, Associate Professor

Department of production of building products and structures

References

  1. Venkiteela, G., Klein, M., Najm, H., Balaguru, P. N. (2017). Evaluation of the Compatibility of Repair Materials for Concrete Structures. International Journal of Concrete Structures and Materials, 11 (3), 435–445. doi: https://doi.org/10.1007/s40069-017-0208-5
  2. Kormann, A. C. M., Portella, K. F., Pereira, P. N., Santos, R. P. (2003). Study of the performance of four repairing material systems for hydraulic structures of concrete dams. Cerâmica, 49 (309), 48–54. doi: https://doi.org/10.1590/s0366-69132003000100011
  3. Huang, H., Hao, J., Zhao, B., Zhao, X., Li, M., Liu, J., Shao, W. (2017). Application of Epoxy Mortar in Anti-erosive Protection of the Spillway on the Xin’anjiang Hydropower Station Plant. Energy Procedia, 105, 1199–1204. doi: https://doi.org/10.1016/j.egypro.2017.03.412
  4. Stehlik, M., Novak, J. (2011). Verification of the effect of concrete surface protection on the permeability of acid gases using accelerated carbonation depth test in an atmosphere of 98 % CO2. Ceramics – Silikáty, 55 (1), 79–84. doi: https://doi.org/10.1155/2018/8386426
  5. Nguyen, T. H., Nguyen, T. A. (2018). Protection of Steel Rebar in Salt-Contaminated Cement Mortar Using Epoxy Nanocomposite Coatings. International Journal of Electrochemistry, 2018, 1–10. doi: https://doi.org/10.1155/2018/8386426
  6. Pereira, A. A. C., d’ Almeida, J. R. M. (2016). Effect of the hardener to epoxy monomer ratio on the water absorption behavior of the DGEBA/TETA epoxy system. Polímeros, 26 (1), 30–37. doi: https://doi.org/10.1590/0104-1428.2106
  7. Ozeren Ozgul, E., Ozkul, M. H. (2018). Effects of epoxy, hardener, and diluent types on the workability of epoxy mixtures. Construction and Building Materials, 158, 369–377. doi: https://doi.org/10.1016/j.conbuildmat.2017.10.008
  8. Debska, B., Lichołai, L. (2016). Resin Composites with High Chemical Resistance for Application in Civil Engineering. Periodica Polytechnica Civil Engineering, 60 (2), 281–287. doi: https://doi.org/10.3311/ppci.7744
  9. Dębska, B., Wójcik, K. (2018). Evaluation of the influence of aggregate type on selected properties of epoxy mortars. E3S Web of Conferences, 49, 00018. doi: https://doi.org/10.1051/e3sconf/20184900018
  10. Yemam, D., Kim, B.-J., Moon, J.-Y., Yi, C. (2017). Mechanical Properties of Epoxy Resin Mortar with Sand Washing Waste as Filler. Materials, 10 (3), 246. doi: https://doi.org/10.3390/ma10030246
  11. Railkin, A. I., Otvalko, Z. A., Korotkov, S. I., Fomin, S. E., Kuleva, N. V. (2017). Concept of environmentally friendly protection against sea fouling and its development using epoxy-rubber coats. Marine Biological Journal, 2 (3), 40–52. doi: https://doi.org/10.21072/mbj.2017.02.3.04
  12. Valášek, P. (2014). Long-Term Degradation of Composites Exposed to Liquid Environments in Agriculture. Scientia Agriculturae Bohemica, 45 (3), 187–192. doi: https://doi.org/10.2478/sab-2014-0107
  13. Gara, An. A. (2014). Analiz vliyaniya mnogofrakcionnogo karkasa na mekhanicheskie svoystva polimernyh kompoziciy. Visnyk Odeskoi derzhavnoi akademiyi budivnytstva ta arkhitektury, 55, 54–61.
  14. Gara, An. A. (2016). The operating properties of the rubber epoxy compositions after the influence of the adsorption–active environment. Visnyk Odeskoi derzhavnoi akademiyi budivnytstva ta arkhitektury, 62, 28–32.
  15. Debska, B., Lichołai, L. (2018). Long-Term Chemical Resistance of Ecological Epoxy Polymer Composites. Journal of Ecological Engineering, 19 (2), 204–212. doi: https://doi.org/10.12911/22998993/82802
  16. Voznesenskiy, V. A., Lyashenko, T. V., Dovgan', A. D. (2004). Kompromissnaya minimizaciya polimeroemkosti i maksimizaciya vodo- i neftestoykosti zashchitnogo kompozita. Resursoekonomni materyaly, konstruktsiyi, budivli ta sporudy, 11, 11–16.
  17. Сzarnecki, L. (2004). Repair systems; searching towards compatibility measure. Bonded Concrete Overlays. Proc. Int. RILEM Workshop, 14–20.
  18. Voznesenskiy, V. A., Lyashenko, T. V. (2017). Metodologiya recepturno-tekhnologicheskih poley v komp'yuternom stroitel'nom materialovedenii. Odessa, 168.
  19. Paturoev, V. V. (1987). Polimerbetony. Moscow, 286.
  20. Lyashenko, T. V., Voznesensky, V. A., Gavriliuk, V. P. (2009). Multicriterial optimisation of autoclaved aerated concrete properties and expenditure of energy resources. Brittle Matrix Composites 9, 219–226. doi: https://doi.org/10.1533/9781845697754.219
  21. Voznesenskiy, V. A., Lyashenko, T. V., Dovgan', A. D. (2007). Kompromissnaya mnogofaktornaya optimizaciya garantirovannogo kachestva shlakoshchelochnyh vyazhushchih (maksimizaciya prochnosti i morozostoykosti, minimizaciya raskhoda resursa). Sovremennoe promyshlennoe i grazhdanskoe stroitel'stvo, 3 (1), 5–15.
  22. Frey, K. (Ed.) (1985). Mineralogicheskaya enciklopediya. Leningrad, 317–322.

Downloads

Published

2018-12-12

How to Cite

Gara, A., Gara, A., & Sukhanova, S. (2018). Analysis of properties of epoxy compositions that operate in contact with water and oil products. Eastern-European Journal of Enterprise Technologies, 6(6 (96), 20–26. https://doi.org/10.15587/1729-4061.2018.150764

Issue

Vol. 6 No. 6 (96) (2018): Technology organic and inorganic substances

Section

Technology organic and inorganic substances

License

Copyright (c) 2018 Anatoliy Gara, Alexander Gara, Svetlana Sukhanova

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.