Optimum characterization of key performance of polymers grinding in rotor disk grinder

Authors

  • Володимир Володимирович Заяць Хмельницький національний університет вул. Інститутська, 11, м. Хмельницький, 29000, Ukraine
  • Юрій Броніславович Михайловський Хмельницький національний університет вул. Інститутська, 11, м. Хмельницький, 29000, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1559

Keywords:

Optimum energoefficiency, grinding down, Java

Abstract

The method of search of optimum parameters is developed for nonlinear mathematical models with plenty of entry parameters, that allows to find a global optimum with sufficient exactness and speed

Author Biographies

Володимир Володимирович Заяць, Хмельницький національний університет вул. Інститутська, 11, м. Хмельницький, 29000

Аспірант

Кафедра машин та апаратів

Юрій Броніславович Михайловський, Хмельницький національний університет вул. Інститутська, 11, м. Хмельницький, 29000

Доцент, кандидат технічних наук, викладач

Кафедра машин та апаратів

References

  1. http://www.mdop.sf.net.
  2. Володарский Е. Т. Планирование и организация измерительного эксперимента[Текст]:/Е.Т. Володарский, Б.Н. Малиновский , Ю.М. Туз – К.: Вища шк. Главное изд-во, 1987. – 280 с.
  3. http://www.java.sun.com.
  4. http://www.sourceforge.net/projects/mdop/.

Downloads

How to Cite

Заяць, В. В., & Михайловський, Ю. Б. (2011). Optimum characterization of key performance of polymers grinding in rotor disk grinder. Eastern-European Journal of Enterprise Technologies, 3(3(51), 50–53. https://doi.org/10.15587/1729-4061.2011.1559

Issue

Vol. 3 No. 3(51) (2011): Control systems

Section

Control systems

License

Copyright (c) 2014 Володимир Володимирович Заяць, Юрій Броніславович Михайловський

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.