Conditions for achieving the accuracy of hole making with the direction of cutting tool

Authors

  • Эдуард Андреевич Пащенко Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 610003, Ukraine
  • Инна Борисовна Плахотникова Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 610003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1568

Keywords:

Coordinated size, precision, factorial experiment

Abstract

The results of integrated studies using a full factorial experiment type 24 precision machining coordinated diameter holes (3 ÷ 10) mm

Author Biographies

Эдуард Андреевич Пащенко, Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 610003

Кандидат технических наук, доцент

Кафедра охраны труда, сертификации и стандартизации

Инна Борисовна Плахотникова, Украинская инженерно-педагогическая академия ул. Университетская, 16, г. Харьков, 610003

Старший преподаватель

Кафедра полиграфического производства и компьютерной графики

References

  1. Душинский В.В. Оптимизация технологических процессов в машиностроении [Текст] / Е.С. Пуховский, С.Г. Радченко // Под. ред. Г.Я. Таурита.- Киев: Техниіка, 1977.-176с.
  2. Шиндовский Э., Статистические методы управлением качеством [Текст] / Шюрц О. -М., Миф, 1976.-599с.

Downloads

How to Cite

Пащенко, Э. А., & Плахотникова, И. Б. (2012). Conditions for achieving the accuracy of hole making with the direction of cutting tool. Eastern-European Journal of Enterprise Technologies, 3(4(51), 15–17. https://doi.org/10.15587/1729-4061.2011.1568

Issue

Vol. 3 No. 4(51) (2011): Mathematics and cybernetics - fundamental and applied aspects

Section

Mathematics and Cybernetics - applied aspects

License

Copyright (c) 2014 Эдуард Андреевич Пащенко, Инна Борисовна Плахотникова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.