Vibrations of attached implements in dynamic tests of bridge constructions

Authors

  • Олександр Васильович Полярус Національний автомобільно-дорожній університет вул. Петровського, 25, м. Харків, 61002, Ukraine
  • Віталій Володимирович Барчан Національний автомобільно-дорожній університет вул. Петровського, 25, м. Харків, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1627

Keywords:

Differential equation, dynamic influence, modeling

Abstract

The system of differential equation of bridge element fluctuation under dynamic influence were synthesized

Author Biographies

Олександр Васильович Полярус, Національний автомобільно-дорожній університет вул. Петровського, 25, м. Харків, 61002

Доктор технічних наук, професор, завідувач кафедри

Кафедра метрології та безпеки життєдіяльності

Віталій Володимирович Барчан, Національний автомобільно-дорожній університет вул. Петровського, 25, м. Харків, 61002

Аспірант

Кафедра метрології та безпеки життєдіяльності

References

  1. Звягинцев А. Н. Метод вибрационной диагностики строительных сооружений (динамическая диагностика). [Текст] / Звягинцев А. Н., Павлов Е. И. - Труды ОАО ЦПИИС. - М.: 2005. – 278 с.
  2. Павлов Е. И. Методика экспериментальной оценки динамических характеристик пролётных строений автодорожных мостов: дисс. … канд. техн. наук [Текст] / Е. И. Павлов. - М., 2006. – 156 с.
  3. Bertrand Combes. Vibrations des structures pour l’ingènieur et le technician. Thèorie et applications / Bertrand Combes. – Paris : Èllipses Edition Marketing, 2009. – 256 p.
  4. Jeongyeup P. C. Wireless Sensor Network for Structural Health Monitoring: Performance and Experience / P. C. Jeongyeup K. Govindan, R. Caffrey, J. Masri : Embedded Networked Sensors. - July 2005. - Р.1-10

Downloads

How to Cite

Полярус, О. В., & Барчан, В. В. (2012). Vibrations of attached implements in dynamic tests of bridge constructions. Eastern-European Journal of Enterprise Technologies, 3(7(51), 49–51. https://doi.org/10.15587/1729-4061.2011.1627

Issue

Vol. 3 No. 7(51) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Олександр Васильович Полярус, Віталій Володимирович Барчан

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.