State control of the cutters according to cutting force

Authors

  • Олег Леонідович Кондратюк Українська інженерно-педагогічна академія вул. Університетська, 16, м. Харків, Україна, 61003, Ukraine
  • Антон Олегович Скоркін Українська інженерно-педагогічна академія вул. Університетська, 16, м. Харків, Україна, 61003, Ukraine
  • Олена Олегівна Литвинова Українська інженерно-педагогічна академія вул. Університетська, 16, м. Харків, Україна, 61003, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1630

Keywords:

Dent destruction, transfer function, stochastic model, back surface

Abstract

The methods of the control of the milling cutters state according to cutting force, characteristics of cutting force components changes, influence of the state of the milling cutters dent during cutting are considered

Author Biographies

Олег Леонідович Кондратюк, Українська інженерно-педагогічна академія вул. Університетська, 16, м. Харків, Україна, 61003

Кандидат технічних наук, доцент

Антон Олегович Скоркін, Українська інженерно-педагогічна академія вул. Університетська, 16, м. Харків, Україна, 61003

Аспірант, асистент

Кафедра металоріжучого обладнання і транспортних систем

Олена Олегівна Литвинова, Українська інженерно-педагогічна академія вул. Університетська, 16, м. Харків, Україна, 61003

Магістр

Кафедра металоріжучого обладнання і транспортних систем

References

  1. Исаев А.И. Высокопроизводительное резание в машиностроение. М.: Наука, 1966 г.
  2. Бобров В.Ф. Основы теории резания металлов. М.: Машиностроение, 1979.
  3. Справочник технолога-машиностроителя: В 2-х т. Т2. Под ред. Косиловой и Р.К. Мешерякова. – М: Машиностроение, 1985–496 с.

Downloads

How to Cite

Кондратюк, О. Л., Скоркін, А. О., & Литвинова, О. О. (2012). State control of the cutters according to cutting force. Eastern-European Journal of Enterprise Technologies, 3(7(51), 60–62. https://doi.org/10.15587/1729-4061.2011.1630

Issue

Vol. 3 No. 7(51) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Олег Леонідович Кондратюк, Антон Олегович Скоркін, Олена Олегівна Литвинова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.