The features of design high-pressure centrifugal compressor for fixed plants

Authors

  • Юрий Михайлович Ануров ОАО «ГТ-ТЭЦ ЭНЕРГО» ул. Трефолева, 2, литер В, г. Санкт-Петербург, Россия, 198097, Russian Federation
  • Анатолий Юрьевич Пеганов ОАО «Центр концептуального проектирования» ул. Трефолева, 2, литер В, г. Санкт-Петербург, Россия, 198097, Russian Federation
  • Денис Валерьевич Шиляев ОАО «Центр концептуального проектирования» ул. Трефолева, 2, литер В, г. Санкт-Петербург, Россия, 198097, Russian Federation

DOI:

https://doi.org/10.15587/1729-4061.2011.1685

Keywords:

Сentrifugal compressor, industrial gas-turbine plant

Abstract

The analysis of application and features of designing of a high-pressure centrifugal compressor step, and also results of calculation of its pressure characteristic on a nominal rotational speed in various CFD packages is resulted

Author Biographies

Юрий Михайлович Ануров, ОАО «ГТ-ТЭЦ ЭНЕРГО» ул. Трефолева, 2, литер В, г. Санкт-Петербург, Россия, 198097

Доктор технических наук

Генеральный конструктор

Анатолий Юрьевич Пеганов, ОАО «Центр концептуального проектирования» ул. Трефолева, 2, литер В, г. Санкт-Петербург, Россия, 198097

Ведущий специалист-расчетчик

Денис Валерьевич Шиляев, ОАО «Центр концептуального проектирования» ул. Трефолева, 2, литер В, г. Санкт-Петербург, Россия, 198097

Специалист

References

  1. Рис. В. Ф. Центробежные компрессорные машины / В.Ф. Рис – М.: – Л., Изд. «Машиностроение», 1964 . – 336 с.
  2. Theodore Gresh Compressor Performance: Aerodynamics for the User, «Elsevier Science & Technology Books», 2001 . – 203 с.
  3. Aungier R.H. Centrifugal Compressors: A Strategy for Aerodynamic Design and Analysis. ASME Press, New York, 2000 . – 328 с.

Downloads

How to Cite

Ануров, Ю. М., Пеганов, А. Ю., & Шиляев, Д. В. (2012). The features of design high-pressure centrifugal compressor for fixed plants. Eastern-European Journal of Enterprise Technologies, 3(10(51), 12–16. https://doi.org/10.15587/1729-4061.2011.1685

Issue

Vol. 3 No. 10(51) (2011): Modern technologies in gas-turbine construction

Section

Modern technologies in the gas-turbine

License

Copyright (c) 2014 Юрий Михайлович Ануров, Анатолий Юрьевич Пеганов, Денис Валерьевич Шиляев

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.