Construction of a theoretical method for estimating the calculation of power used by feed rollers in the cleaners of raw cotton from fine debris

Authors

DOI:

https://doi.org/10.15587/1729-4061.2019.174213

Keywords:

fibrous material, fine debris, feed rollers, pin rollers, layer deformation

Abstract

Abstracts

Author Biography

Fazil Veliev, Azerbaijan State University of Economics(UNEC) Istiglyaliyat str., 6, Baku, Azerbaijan, AZ 1001

Doctor of Technical Sciences, Professor

Department of technological machines and equipment of the branch

References

  1. Sapon, A. L., Samandarov, S. A., Libster, S. L. (2007). Potochnaya liniya pervichnoy pererabotki hlopka-syrtsa PLPH. Hlopkovaya promyshlennost', 3, 1–3.
  2. Nesterov, G. P., Borodin, P. N., Belyalov, R. F. (2008). Novaya potochnaya liniya sushki i ochistki hlopka-syrtsa. Hlopkovaya promyshlennost', 1, 2–4.
  3. Tyutin, P. N., Lugachev, L. E. (1997). O vydelenii sornyh primesey cherez yacheyki setchatyh poverhnostey. Mekhanicheskaya tekhnologiya voloknistyh materialov, 19, 51–58.
  4. Hafizov, I. K., Rasulov, A. (2009). Issledovanie razryhlitel'nogo effekta razdelitelya dolek tonkovoloknistogo hlopka-syrtsa na letuchki. Hlopkovaya promyshlennost', 3, 9.
  5. Miroshnichenko, G. I., Burnashev, R. Z. (1999). Optimizatsiya konstruktivnyh parametrov kolosnikovo-pil'chatyh rabochih organov i sistem pitaniya ochistiteley krupnogo sora. Otchet po teme 3/I-74-2I. TITLP. Tashkent, 259.
  6. Baydyuk, P. V. (1994). Primenenie valkovyh ustroystv pri pressovanii voloknistyh materialov. TSINTI, 4, 2–8.
  7. Miroshnichenko, G. I., Burnashev, R. Z. (2003). Vybor parametrov ustroystv dlya izmeneniya napravleniya dvizheniya semyan. Hlopkovaya promyshlennost', 3, 20.
  8. Boldinskiy, G. I., Maksudov, H. T. (2002). O rabote otboynyh ustroystv, primenyaemyh na daynah dlya povysheniya stepeni ochistki volokna ot sornyh primesey. Hlopkovaya promyshlennost', 1.
  9. Samandarov, S. A. (2008). Nekotorye elementy teorii ochistki hlopka-syrtsa. Sbornik nauchnyh trudov, UT.-T.
  10. Veliev, F., Sailov, R., Kerimova, N., Safarova, T., İsmailzade, M., Sultanov, E. (2018). Influence of storage duration and density of raw cotton on the mechanics of the interaction process between feeding rollers in the cleaners of large impurities. Eastern-European Journal of Enterprise Technologies, 3 (1 (93)), 78–83. doi: https://doi.org/10.15587/1729-4061.2018.132493
  11. Veliev, F., Sailov, R. (2018). Influence of elastic characteristics of raw cotton on the mechanics of feed rollers in the cleaners from large impurities. Eastern-European Journal of Enterprise Technologies, 5 (1 (95)), 53–60. doi: https://doi.org/10.15587/1729-4061.2018.143133
  12. Bronshteyn, I. P., Semendyaev, K. A. (1981). Spravochnik po matematike. Moscow: "Nauka", 720.

Downloads

Published

2019-07-25

How to Cite

Veliev, F. (2019). Construction of a theoretical method for estimating the calculation of power used by feed rollers in the cleaners of raw cotton from fine debris. Eastern-European Journal of Enterprise Technologies, 4(7 (100), 46–54. https://doi.org/10.15587/1729-4061.2019.174213

Issue

Vol. 4 No. 7 (100) (2019): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2019 Fazil Veliev

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.