Coverings for protection against fretting-corrosion

Authors

  • Светлана Викторовна Ляшок Институт проблем машиностроения им. А.Н. Подгорного ул. Дм. Пожарского, 2/10, г. Харьков, Украина, 61046, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.1785

Keywords:

Vacuum-plasma coating, fretting-corrosion, adhesion

Abstract

Influence of multilayer vacuum-plasma coating (a-Ti+TiN)´5 and also coating from MoS2 on damage resistance of steel samples in conditions of fretting-corrosion has been investigated

Author Biography

Светлана Викторовна Ляшок, Институт проблем машиностроения им. А.Н. Подгорного ул. Дм. Пожарского, 2/10, г. Харьков, Украина, 61046

Аспирантка

Отдел материаловедения

References

  1. Уотерхауз Р. Б. Фреттинг-коррозия / Р. Б. Уотерхауз. – Л.: Машино-строение, 1976. – 272 с.
  2. Шевеля В. В. Фреттинг-усталость металлов / В. В. Шевеля, Г. С. Калда. – Х.: Поділля, 1998. – 299 с.
  3. Мацевитый В. М. Покрытия для режущих инструментов / В. М. Мацевитый. – Х.: Вища школа, 1987. — 128 с.
  4. Weismantel E. E. Friction and Fretting with Solid Film Lubricants / E. E. Weismantel // Lubrication Engineering. – 1955. – Vol. 11. – P. 97 – 100.
  5. Batten B. K. Fatigue Tests in Air on Model Propeller-Tailshaft Assemblies / B. K. Batten, A. J. Couchman // Trans. N. E. Coast Instn. Engrs. Ship-builders. – 1963. – Vol. 79, N 5. – P. 189 – 228.
  6. Мацевитый В. М. Способ контроля качества адгезии износостойких по-крытий / В. М. Мацевитый, Л. М. Романова, В. М. Береснев // Применение прогрессивных инструментальных материалов и методов повышения стойкости режущих инструментов: І науч.-техн. конф., 1983 г.: тезисы докл. – Краснодар: НТО Машпром, 1983. – С. 93 – 94

Downloads

How to Cite

Ляшок, С. В. (2012). Coverings for protection against fretting-corrosion. Eastern-European Journal of Enterprise Technologies, 2(5(50), 27–30. https://doi.org/10.15587/1729-4061.2011.1785

Issue

Vol. 2 No. 5(50) (2011): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Светлана Викторовна Ляшок

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.