Research into energy characteristics of single-phase active four-quadrant rectifiers with the improved hysteresis modulation
DOI:
https://doi.org/10.15587/1729-4061.2019.179205Keywords:
active four-quadrant rectifier, hysteresis modulation, dynamic losses, energy efficiency, power coefficientAbstract
The traction electric drives for electric rolling stock of alternating current employ the diode and thyristor rectifiers that predetermine a series of shortcomings. These include the significant emission of reactive power and higher harmonics of currents to the contact network, as well as the impossibility of implementing electricity recuperation to the contact network. In this regard, it is promising to use single-phase four-quadrant active rectifiers with a correction of power coefficient. The advantage of these converters is ensuring a power coefficient close to unity, the implementation of the sinusoidal input current, as well as the possibility of implementing electricity recuperation to the power network.
In the systems of control over active rectifiers quite common are the control systems with hysteresis modulation. However, hysteresis modulation predetermines the need to implement high and variable frequency for switching power keys, which negatively affects power losses in a transducer. Therefore, a control system with improved hysteresis modulation has been proposed. Due to the improved algorithm for switching power keys the proposed improved hysteresis control system makes it possible to reduce the number of switching power switches. That decreases the dynamic losses of power in an active rectifier, which makes it possible to improve the efficiency of electric rolling stock in general.
The simulation modeling conducted in the MATLAB 2017b software has confirmed effectiveness of the proposed modulation algorithm. In addition, during implementation of the proposed commutation algorithm there is an improvement in the harmonic composition of input current. The reduction in the amplitudes of higher harmonics of input current has been confirmed, as well as the improvement in the resultant coefficient of harmonic distortionsReferences
- Blahnik, V., Talla, J. (2016). Single-phase synchronization for traction active rectifier. 2016 International Conference on Applied Electronics (AE). doi: https://doi.org/10.1109/ae.2016.7577233
- Fomin, O. (2014). Modern requirements to carrying systems of railway general-purpose gondola cars. Metallurgical and Mining Industry, 5, 31–44.
- Maliakova, M., Kalinov, A. (2017). APF control with the use of the direction of the energy flow determination method in the electric circuit with a nonlinear load. 2017 International Conference on Modern Electrical and Energy Systems (MEES). doi: https://doi.org/10.1109/mees.2017.8248894
- Bohra, A., Sajeesh, D., Patel, C., Saldanha, M. (2016). Modulation techniques in single phase PWM rectifier. IJCA Proceedings on International Conference on Advances in Science and Technology, 5–7.
- Plakhtiy, O. A., Nerubatskiy, V. P., Sushko, D. L., Kavun, V. E. (2018). Reduction of dynamic losses in the active one-phase four-quadrant converter with the improved algorithm of hysteresis modulation. Praci Institutu Elektrodinamiki Nacional'noi Akademii Nauk Ukraini, 51, 88–94. doi: https://doi.org/10.15407/publishing2018.51.088
- Fomin, O. V. (2015). Increase of the freight wagons ideality degree and prognostication of their evolution stages. Scientific Bulletin of National Mining University, 3, 68–76.
- Javier Arcega Solsona, F., Pardina Carrera, A. (2014). Study of harmonics thermal effect in conductors produced by skin effect. IEEE Latin America Transactions, 12 (8), 1488–1495. doi: https://doi.org/10.1109/tla.2014.7014518
- Nerubatskyi, V., Plakhtii, O., Kotlyarov, V. (2019). Analysis of topologies of active four-quadrant rectifiers for implementing the INDUSTRY 4.0 principles in traffic power supply systems. International scientific journal «INDUSTRY 4.0», 4 (3), 106–109.
- Shobini, M. M., Kamala, J., Rathna, R. (2017). Analysis and simulation of flying capacitor multilevel inverter using PDPWM strategy. 2017 International Conference on Innovative Mechanisms for Industry Applications (ICIMIA). doi: https://doi.org/10.1109/icimia.2017.7975578
- Scherback, Y. V., Plakhtiy, O. A., Nerubatskiy, V. P. (2017). Control characteristics of active four-quadrant converter in rectifier and recovery mode. Tekhnichna Elektrodynamika, 6, 26–31.doi: https://doi.org/10.15407/techned2017.06.026
- Oleksandr, P., Volodymyr, N. (2018). Analyses of Energy Efficiency of Interleaving in Active Voltage-Source Rectifier. 2018 IEEE 3rd International Conference on Intelligent Energy and Power Systems (IEPS). doi: https://doi.org/10.1109/ieps.2018.8559514
- Kiran, B., Parthiban, P., Jena, D., Prakash, P. S. (2016). Design and implementation of sliding mode voltage controller for DC to DC buck converter by using hysteresis modulation and pulse width modulation. 2016 Biennial International Conference on Power and Energy Systems: Towards Sustainable Energy (PESTSE). doi: https://doi.org/10.1109/pestse.2016.7516439
- Sondur, V. V., Sondur, V. B., Rao, D. H., Latte, M. V., Ayachit, N. H. (2007). Issues in the Design of Equiripple FIR Higher Order Digital Differentiators using Weighted Least Squares Technique. 2007 IEEE International Conference on Signal Processing and Communications. doi: https://doi.org/10.1109/icspc.2007.4728287
- Ahmadzadeh, T., Sabahi, M., Babaei, E. (2017). Modified PWM control method for neutral point clamped multilevel inverters. 2017 14th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology (ECTI-CON). doi: https://doi.org/10.1109/ecticon.2017.8096351
- Gervasio, F., Mastromauro, R. A., Liserre, M. (2015). Power losses analysis of two-levels and three-levels PWM inverters handling reactive power. 2015 IEEE International Conference on Industrial Technology (ICIT). doi: https://doi.org/10.1109/icit.2015.7125248
- Colak, K., Asa, E., Czarkowski, D. (2016). A novel phase control of single switch active rectifier for inductive power transfer applications. 2016 IEEE Applied Power Electronics Conference and Exposition (APEC). doi: https://doi.org/10.1109/apec.2016.7468107
- Wei, L., Jankovic, Z., Patel, Y. P., Hu, J. (2016). Single phase precharge control method for active front end rectifier. 2016 IEEE Energy Conversion Congress and Exposition (ECCE). doi: https://doi.org/10.1109/ecce.2016.7855436
- Swamy, M., Guddanti, C. (2014). An improved single-phase active front end rectifier system for use with three-phase variable frequency drives. 2014 IEEE Applied Power Electronics Conference and Exposition - APEC 2014. doi: https://doi.org/10.1109/apec.2014.6803514
- Shruti, K. K., Valsalan, T., Poorani, S. (2017). Single phase active front end rectifier system employed in three phase variable frequency drive. International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering, 5, 121–129. Available at: https://ijireeice.com/wp-content/uploads/2017/05/IJIREEICE-nCORETech-16.pdf
- Suhara, E. M., Nandakumar, M. (2015). Analysis of Hysteresis Current Controlled Three Phase PWM Rectifier with Reduced Switching Loss. IJCTA, 8 (3), 877–887.
- Nerubatskyi, V. P., Plakhtiy, A. A., Gladka, A. V. (2018). EMC improvment research of three-phase active rectifiers with power factor correction in regenerative mode. Collected scientific works of Ukrainian State University of Railway Transport, 178, 21–28. doi: https://doi.org/10.18664/1994-7852.178.2018.138906
- Dias, R. A., Lira, G. R. S., Costa, E. G., Ferreira, R. S., Andrade, A. F. (2018). Skin effect comparative analysis in electric cables using computational simulations. 2018 Simposio Brasileiro de Sistemas Eletricos (SBSE). doi: https://doi.org/10.1109/sbse.2018.8395687
- Zagirnyak, M., Maliakova, M., Kalinov, A. (2015). Analysis of operation of power components compensation systems at harmonic distortions of mains supply voltage. 2015 Intl Aegean Conference on Electrical Machines & Power Electronics (ACEMP), 2015 Intl Conference on Optimization of Electrical & Electronic Equipment (OPTIM) & 2015 Intl Symposium on Advanced Electromechanical Motion Systems (ELECTROMOTION). doi: https://doi.org/10.1109/optim.2015.7426958
- Plakhtii, O., Nerubatskyi, V., Ryshchenko, I., Zinchenko, O., Tykhonravov, S., Hordiienko, D. (2019). Determining additional power losses in the electricity supply systems due to current's higher harmonics. Eastern-European Journal of Enterprise Technologies, 1 (8 (97)), 6–13. doi: https://doi.org/10.15587/1729-4061.2019.155672
- Zhao, L., Wang, Q., Li, G., Chen, Q., Hu, C. (2014). Analyze and compare the efficiency of two-level and three-level inverter in SVPWM. 2014 9th IEEE Conference on Industrial Electronics and Applications. doi: https://doi.org/10.1109/iciea.2014.6931488
- Vintrih, A., Ul'rih, N., Kolpakov, A. I., Mysak, T. V., Polishchuk, S. I. (2017). Analiz dinamicheskih poter' moshchnyh IGBT. Vestnik Natsional'nogo tehnicheskogo universiteta «Kharkivskiy politehnicheskiy institut», 27, 191–196.
- Podder, S., Biswas, M. M., Khan, M. Z. R. (2016). A modified PWM technique to improve total harmonic distortion of Multilevel Inverter. 2016 9th International Conference on Electrical and Computer Engineering (ICECE). doi: https://doi.org/10.1109/icece.2016.7853970
- Dai, P., Guo, G., Gong, Z. (2016). A Selection Precharge Method for Modular Multilevel Converter. International Journal of Control and Automation, 9 (4), 161–170. doi: https://doi.org/10.14257/ijca.2016.9.4.16
- Ferdowsi, F., Yazdankhah, A. S., Rohani, H. (2014). A combinative method to control output power fluctuations of large grid-connected photovoltaic systems. 2014 14th International Conference on Environment and Electrical Engineering. doi: https://doi.org/10.1109/eeeic.2014.6835875
- Orlov, A. I. (2013). Renewal dependence method of least squares based nonparametric model with periodic component. Scientific Journal of KubSAU, 91 (07).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Oleksandr Plakhtii, Volodymyr Nerubatskyi, Nadiia Karpenko, Denys Hordiienko, Olha Butova, Hryhorii Khoruzhevskyi
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.