Trasfielders fluxes of induction vector electromagnetic field of reactive components
DOI:
https://doi.org/10.15587/1729-4061.2013.19691Keywords:
reactive components, capacitor, inductance coil, flux of induction vector, capacitor transformerAbstract
The study of the ways and methods of implementation of passive reactive components of electrical circuits was conducted in the paper. In particular, it is the question about inductance coils, capacitors, transformers and other reactive components. The generalized block diagrams of functional transformations of physical quantities such as descriptors, which form their mathematical model, are given. It was proved that irrespective of the type of reactive component, all of them are characterized by the transformation of fluxes of electric induction vectors into fluxes of magnetic induction and vice versa in local volumes, which are set in a particular design. Thus, it was proved that any reactive component can be characterized as the flux transformer − transfielder.
It was shown that in isotropic media, according to the Maxwell equations, the transformation of fluxes of electric induction vectors into magnetic induction vectors and vice versa occurs in orthogonal planes. This fact allowed to set the criteria assessment of the transfielder designs optimality.
One of the main results of the study was the illustration of using not only the conduction current but also the displacement current as the derivative of the flux of electric induction vector. On this basis, the block diagram of transfielder, which uses the displacement current and serves as the transformer with capacitance input, was developed.
Thus, the proposed study is the generalized analysis of the whole class of reactive components that allowed to point out the ways of improving the existing and developing new reactive components with better performance characteristics such as reliability, frequency ranges, coordination ways and temperature modes.References
- Nazmul Islam. Microelectromechanical Systems and Devices [Electronic resource] / Dr. Nazmul Islam (Ed.), InTech, 2012, ISBN: 978-953-51-0306-6. Chapter 8: Petrenko A. I. “Macromodels of Micro-Electro-Mechanical Systems (MEMS) // Mode of access: WWW.URL: http://cdn.intechopen.com/pdfs/33594/InTech-Macromodels_of_micro_electro_mechanical_systems_mems_.pdf
- Electronics from the Bottom Up: A New Approach to Nanoelectronic Devices and Materials [Electronic resource] // Created on 20 Jun 2008. Mode of access: WWW.URL: http://nanohub.org/topics/ElectronicsFromTheBottomUp - Last modified on 28 Aug 2012.
- A resource for nanoscience and nanotechnology, nanoHUB.org was created by the NSF-funded Network for Computational Nanotechnology [Electronic resource] // Copyright © 2009 NCN - Mode of access: WWW.URL: http://nanohub.org/
- Балакирев М. В. Радиопередающие устройства [Текст] / М.В. Балакирев, Ю.С. Вохмяков, А.В. Журиков и др.// М.: Радио и связь, 1982. 256с.
- Синегуб, Н. И. Микропроцессоры звездообразной структуры с расширенными функциональными возможностями. [Текст] / Н. И. Синегуб, В. С. Ситников // Технология и конструирование в электронной аппаратуре. – 2010. – № 4. – С. 40-42.
- Жоаким, К. Нанонауки. Невидимая революция [Текст] / К. Жоаким, Л. Плевер. - М.: Колибри, 2009. - 235 с.
- Кудря, В. Г. Моделювання нанотехнологічних електронних засобів. Монографія [Текст] // Одеська національна академія харчових технологій – Херсон. Олді-плюс, 2013. – 780 с. – Режим доступу: http://nbuv.gov.ua/.
- Жан, М. Рабаи. Цифровые интегральные схемы. Методология проектирования [Текст] / Жан М. Рабаи, Ананта Чандракасан, Боривож Николич // Москва*Санкт-Петербург*Киев: Изд-во ВИЛЬЯМС -W, 2007. 911 c. – Режим доступу http://www.williamspublishing.com/Books/978-5-8459-1116-2.htm.
- Кудря, В. Г. Фізико-математичне моделювання в наноелектроніці. [Текст] / В. Г. Кудря, Ю. О. Лємєхов, Є. Л. Саркісьян // Східно-Європейський журнал передових технологій. - 2012. -Т. 5 №3(59). - С. 10 – 13. – Режим доступу: http://journals.uran.ua/eejet/article/view/4497.
- Кудря, В. Г. Системне проектування функціональних перетворювачів. // Труды пятой международной научно-практической конференции "Современные информационные и электронные технологии", 17 — 21 мая 2004 г. , Одесса: СИЭТ, 2004, с. 165.
- Nazmul Isla, Petrenko, A. I. (2012). Microelectromechanical Systems and Devices, InTech, ISBN: 978-953-51-0306-6. Chapter 8: “Macromodels of Micro-Electro-Mechanical Systems (MEMS). Mode of access: WWW.URL: http://cdn.intechopen.com/pdfs/33594/InTech-Macromodels_of_micro_electro_mechanical_systems_mems_.pdf.
- (2008). Electronics from the Bottom Up: A New Approach to Nanoelectronic Devices and Materials. Mode of access: WWW.URL: http://nanohub.org/topics/ElectronicsFromTheBottomUp.
- (2009) A resource for nanoscience and nanotechnology, nanoHUB.org was created by the NSF-funded Network for Computational Nanotechnology. Copyright © 2009 NCN - Mode of access: WWW.URL: http://nanohub.org/.
- Balakirev M.,Vohmyakov Y., Juric A. et al (1982) Radio transmitters. M.: Radio and communication, 256.
- Sinegub, N., Sitnikov, V. (2010). Microprocessors star-like structure with enhanced functionality. Technology and design in electronic equipment, 4, 40-42.
- Joachim, K., Plever, L. (2009). Nanoscience. Revolution is not visible, 235.
- Kudrya, V. (2013). Simulation nanotechnology electronic means. Monograph. Odessa National Academy of Food Technologies, 780.
- Jean M. Raban, Anantha Chandrakasan, Borivozh Nikolic (2007). Digital integrated circuits. Design methodology, 911.
- Kudrya ,V., Lyemyehov, Y., Sarkisyan, E. (2012). Physical and mathematical modeling in nanoelectronics. Eastern-European Journal of Enterprise Technologies, V. 5, № 3 (59), 10 - 13.
- Kudrya, V. (2004). Systems engineering functional transformers. Proceedings of the Fifth International Scientific-Practical Conference "Modern information and electronic technologies", 165.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Володимир Григорович Кудря
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
