Getting enamels on the basis of recycled polystyrene

Authors

  • Наталія Євгенівна Шолух Institute of chemical technology East Ukrainian national University named. Vladimir Dal vul. Lenin, 33, Rubizhne, Luhansk region, Ukraine, 93009, Ukraine https://orcid.org/0000-0002-0224-3204

DOI:

https://doi.org/10.15587/1729-4061.2014.20072

Keywords:

polystyrene wastes, high-impact polystyrene, lacquer, enamel, excipients, paint compositions

Abstract

The formulations for lacquer and enamel compositions based on "secondary" polystyrene were developed, and physicomechanical properties of coatings based on these compositions were studied. It was shown that as a solvent, it is better to use a mixture of toluene and ethyl acetate in the ratio of 1:1 that allows obtaining lacquer compositions with high speed of drying out and time, sufficient for forming a heavy-duty coating. It was determined that the physicomechanical characteristics of all samples of paint compositions are higher comparing to the known similar enamels (TU 67-371-81 Enamels polystyrene), namely coating hardness and water resistance characteristics. Using "secondary" polystyrene in the developed compositions will significantly reduce lacquer and enamel costs. Using polystyrene wastes for the production of lacquers and enamels will solve two urgent problems: the saving of crude products and materials, involved in the production of polymeric materials and the environmental protection of industrial regions.

Author Biography

Наталія Євгенівна Шолух, Institute of chemical technology East Ukrainian national University named. Vladimir Dal vul. Lenin, 33, Rubizhne, Luhansk region, Ukraine, 93009

Candidate of chemical Sciences, associate Professor

Department of technology of high-molecular compounds

References

  1. Овчинникова, Г. П. Совремнные подходы к рециклингу вторичного полиэтилентерефталата [Текст] / Г. П. Овчинникова, Р. А. Абдуллаев, С. Е. Артеменко // Пластические массы. – 2008. – № 1. – С. 27-28.
  2. Ла Мантия, Ф. Вторичная переработка пластмасс [Текст] / Ф. Ла Мантия (ред.); пер. с англ. под ред. Г. Е. Заикова. – СПб: Профессия. – 2006. – 400 с.
  3. Корнеев, И. С. Переработка отходов полимерных материалов и резинотехнических изделий в компоненты моторных топлив [Текст] / И. С. Корнеев // Диссертация на соискание ученой степени кандидата химических наук. – Москва. – 2011. – 108 с.
  4. Пат. 2000110105/04 RU, МПК 7 C09D 125/06 (UA). Лакокрасочное покрытие и способ его применения [Текст] / Янковский Н. А. , Туголуков А. В., Степанов В. А., и др.; заявитель Горловское открытое акционерное общество «Концерн Стирол» – № 2165950; заявл. 19.04.00; опубл. 24.04.01, Бюл. № 4. – 6 с.
  5. Пат. 97121192/04 RU МПК 7 C09D 125/00 (UA). Состав для лакокрасочных материалов [Текст] / Янковский Н. А., Туголуков А. В., Степанов В. А., и др.; заявитель Горловское открытое акционерное общество «Концерн Стирол» (UA) № 2142486 заявл. 11.12.1997; опубл. 10.12.1999, Бюл. № 12. – 4 с.
  6. Пат. 2011130714/05 RU, МПК 7 C09D125/06. Состав полистирольной краски [Текст] / Мехонцев И. В.; заявитель Мехонцев И. В. – № 2472827; заявл. 21.07.11; опубл. 20.01.13, Бюл. № 1. – 6 с.
  7. Пат. 2000111819/04 RU, МПК 7 C09D125/06. Состав полистирольной краски [Текст] / Янковский Н. А., Степанов В. А.
  8. и др.; заявитель Открытое акционерное общество «Концерн Стирол» – № 2165951; заявл. 11.05.00; опубл. 27.04.01,
  9. Бюл. № 4. – 4 с.
  10. Логанина, В. И. Перспективы развития производства полистирольной краски с органоминеральной добавкой [Текст] / В. И. Логанина, Н. А. Петухова, Т. Н. Дмитриева та ін. // Труды международного симпозиума «Надежность и качество», 2009. - Т. 2. – С. 209 - 211.
  11. Лившиц, М. Л. Технический анализ и контроль производства лаков и красок [Текст] / М. Л. Лившиц. – М.: Высш. школа, 1980. – 216 с.
  12. Орлова, О. В. Технология лаков и красок: Учебник для техникумов [Текст] / О. В. Орлова, Т. Н. Фомичева. – М.: Химия, 1990. – 384 с.
  13. Карякина, М. И. Лабораторный практикум по испытанию лакокрасочных материалов и покрытий [Текст] / М. И. Карякина. - М.: Химия, 1977. – 240 с.
  14. Часник, О. Ф. Про створення рецептур лакофарбрвого складу з оптимальною кількістю пігментів і наповнювачів [Текст] / О. Ф. Часник, О. В. Мороз // Восточно-Европейский журнал передовых технологий. – 2010. – № 6/6 (48). – С. 7 – 9.
  15. Ovchinnikova, H. P., Abdullaev, R. A., Artemenko, S. E. (2008). Sovremnnye podkhody k retsiklinhu vtorichnoho polietilentereftalata. Plasticheskie massy, 1, 27–28.
  16. In: La Mantiia, F.; Translation from English Zaikova, H. E. (2006). Vtorichnaia pererabotka plastmass. SPb: Professiia, 400.
  17. Korneev, I. S. (2011). Pererabotka otkhodov polimernykh materialov i rezinotekhnicheskikh izdelii v komponenty motornykh topliv: Thesis for the degree of PhD. Moskva, 108.
  18. Yankovskii, N. A., Tuholukov, A. V., Stepanov, V. A. (2001). Applicant Horlovskoe otkrytoe aktsionernoe obshchestvo «Kontsern Stirol». Pat. 2000110105/04 RU, MPK 7 C09D 125/06. Lakokrasochnoe pokrytie i sposob eho primeneniia. № 2165950; stated 19.04.00. Biul. № 4, 6.
  19. Yankovskii, N. A., Tuholukov, A. V., Stepanov, V. A. (1999). Applicant Horlovskoe otkrytoe aktsionernoe obshchestvo «Kontsern Stirol». Pat. 97121192/04 RU MPK 7 C09D 125/00. Sostav dlia lakokrasochnykh materialov. № 2142486; stated 11.12.1997. Biul. № 12, 4.
  20. Mekhontsev, I. V. (20.01.2013). Pat. 2011130714/05 RU, MPK 7 C09D125/06. Sostav polistirol’noi kraski. № 2472827; stated 21.07.11. Biul. № 1, 6.
  21. Yankovskii, N. A., Stepanov, V. A. (2001). Applicant Horlovskoe otkrytoe aktsionernoe obshchestvo «Kontsern Stirol». Pat. 2000111819/04 RU, MPK 7 C09D125/06. Sostav polistirol’noi kraski. № 2165951; stated 11.05.00. Biul. № 4, 4.
  22. Lohanina, V. I., Petukhova, N. A., Dmitrieva, T. N. (2009). Perspektivy razvitiia proizvodstva polistirol’noi kraski s orhanomineral’noi dobavkoi. Trudy mezhdunarodnoho simpoziuma «Nadezhnost’ I kachestvo», 2, 209–211.
  23. Livshits, M. L. (1980). Tekhnicheskii analiz i kontrol’ proizvodstva lakov i krasok. M.: Vyssh. shkola, 216.
  24. Orlova, O. V., Fomicheva, T. N. (1990). Tekhnolohiia lakov i krasok: Textbook. M.: Khimiia, 384.
  25. Kariakina, M. I. (1977). Laboratornyi praktikum po ispytaniiu lakokrasochnykh materialov i pokrytii. M.: Khimiia, 240.
  26. Chasnik, O. F., Moroz, O. V. (2010). About creation of varnish–and–paint formulations with the optimal number of pigments and fillers. Eastern–European Journal Of Enterprise Technologies, 6(6(48)), 7–9.

Downloads

Published

2014-02-07

How to Cite

Шолух, Н. Є. (2014). Getting enamels on the basis of recycled polystyrene. Eastern-European Journal of Enterprise Technologies, 1(6(67), 33–36. https://doi.org/10.15587/1729-4061.2014.20072

Issue

Vol. 1 No. 6(67) (2014): Technology organic and inorganic substances. Materials Science

Section

Technology organic and inorganic substances

License

Copyright (c) 2014 Наталія Євгенівна Шолух

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.