Development of the normative support for the production of hybrid silica fillers dental composite materials

Authors

DOI:

https://doi.org/10.15587/1729-4061.2014.20336

Keywords:

silica filler, dental composite materials, hybrid gels, aggregation, hydrophobicity

Abstract

The research on the problems of normative support for quality control of silica filler with a reduced tendency to aggregation, obtained from hybrid gels of the system MTEOS–TEOS–water–alcohol under conditions of variable pH was given. As a result of the conducted studies, the technology for hybrid filler with a homogeneous structure and uniform particles surface hydrophobization was developed. It was established that the inincrease in the ratio MTEOS/TEOS in the gel increases the particles adsorption activity of the silica powder and its hydrophobicity degree due to the methyl groups presence on the particles surface. It was found that the alkali concentration at TEOS and MTEOS hydrolysis products joint coagulation has a decisive influence on the homogeneity degree of powder and its physicochemical characteristics. The method of quality control of the hybrid silica filler of dental composite materials was developed.

Author Biographies

Антон Юрьевич Лозовской, Ukrainian engineering-pedagogical Academy Universitetskaya str., 16, Kharkov, Ukraine, 510003

Postgraduate student of the Department of technologies for the food industry

Дарья Юрьевна Олейник, Ukrainian engineering-pedagogical Academy Universitetskaya str., 16, Kharkov, Ukraine, 510003

Postgraduate student of the Department of technologies for the food industry

Ольга Борисовна Скородумова, Ukrainian engineering-pedagogical Academy Universitetskaya str., 16, Kharkov, Ukraine, 510003

Doctor of technical Sciences, Professor, head of the Department of technologies for the food industry

Татьяна Борисова Гонтар, Ukrainian engineering-pedagogical Academy Universitetskaya str., 16, Kharkov, Ukraine, 510003

Assistant of the Department of technologies for the food industry

Яна Николаевна Гончаренко, Ukrainian engineering-pedagogical Academy Universitetskaya str., 16, Kharkov, Ukraine, 510003

Candidate of technical Sciences, assistant of the Department of technologies for the food industry

References

  1. Миара, П. Эстетические принципы реставрации вкладками и накладками, изготовленными из “непрямых” композиционных материалов второго поколения [Текст] / П. Миара // Стоматолог.- 2001.- №8.- С. 16-23.
  2. Уголева, С. Н. Композиционные пломбировочные материалы [Текст] / С. Н. Уголева // Новое в стоматологии.- 1995 (31).– № 1.– С. 4-8.
  3. Почерняев, А. И. Новое в композитных технологиях для стоматологии [Текст] / А. И. Почерняев, В. К. Шевченко, В. С. Москаленко // Стоматолог. – 1998.- №3.- С. 46-52.
  4. Скородумова, О. Б. Влияние морфологии наполнителя на физико-механические свойства композиционных материалов для стоматологии [Текст] / О. Б. Скородумова, М. П. Качоманова, Я. Н. Гончаренко // Зб. Наук. праць ВАТ „УкрНДІВогнетривів імені А. С. Бережного” - Харків, 2005.- №105.- С. 150-157.
  5. Enceub, Х. Surface treatment of fine powders [Текст] / Х. Enceub // Jap. Soc. Powders and Powder Met.- 1981.- 28.- N5.- P. 157-166.
  6. Лисичкин, Г. В. Модифицированные кремнеземы в сорбции, катализе и хроматографии [Текст] / Г. В. Лисичкин, Г. В. Кудрявцев - М: Химия, 1986.– 248 с.
  7. Шабанова, Н. А. Кинетика поликонденсации и коагуляции в гидрозоле кремнезема [Текст] / Н. А. Шабанова, В .В. Попов, Ю. Г. Фролов // Коллоидный журнал.- 1984.- №5.- С. 986-993.
  8. Слинякова, И. Б. Кремнийорганические адсорбенты: Получение, свойства, применение [Текст] / И. Б. Слинякова, Т. И. Денисова. - Киев: Наукова думка, 1988.- 192 с.
  9. Карнаухова, Т. М. Исследование структурообразования в золях кремнезема методом спектра мутности [Текст] / Т. М. Карнаухова, Н. К. Иванов, М. С. Захаров // Коллоидный журнал.- 1985.- №6.- С. 1180-1183.
  10. Скородумова, О. Б. Исследование гибридных органо-неорганических золей SiO2 – прекурсоров композиционных биокерамических материалов [Текст] / О. Б. Скородумова, Я. Н. Гончаренко Т. Б. Гонтар / Сб. научных трудов «Технология и применение огнеупоров и технической керамики в промышленности», Харьков: Каравелла.- 2010.- № 110.- С. 307-312.
  11. Miara, P. Esteticheskie principy restavracii vkladkami i nakladkami, izgotovlennymi iz “nepryamyh” kompozicionnyh materialov vtorogo pokoleniya. Stomatolog, 8, 16–23.
  12. Ugoleva, S. N. Kompozicionnye plombirovochnye materialy. Novoe v stomatologii, 1, 4–8.
  13. Pochernyaev, A. I. Novoe v kompozitnyh tehnologiyah dlya stomatologii. Stomatolog, 3, 46–52.
  14. Skorodumova, O. B. Vliyanie morfologii napolnitelya na fiziko–mehanicheskie svoistva kompozicionnyh materialov dlya stomatologii. VAT «UkrNDІVognetrivіv іmenі A. S. Berejnogo», 105, 150–157.
  15. Enceub, H. Surface treatment of fine powders. Jap. Soc. Powders and Powder Met, 5, 157–166.
  16. Lisichkin, G. V. (1986). Modificirovannye kremnezemy v sorbcii, katalize i hromatografii. Himiya, 248.
  17. Shabanova, N. A. Kinetika polikondensacii i koagulyacii v gidrozole kremnezema. Kolloidnyi jurnal, 5, 986–993.
  18. Slinyakova, I. B. Kremniiorganicheskie adsorbenty: Poluchenie, svoistva, primenenie. Naukova dumka, 192.
  19. Karnauhova, T. M. Issledovanie strukturoobrazovaniya v zolyah kremnezema metodom spektra mutnosti. Kolloidnyi jurnal, 6, 1180–1183.
  20. Skorodumova, O. B. Issledovanie gibridnyh organo–neorganicheskih zolei SiO2 – prekursorov kompozicionnyh biokeramicheskih materialov. Sb.nauchnyh trudov “Tehnologiya i primenenie ogneuporov i tehnicheskoi keramiki v promyshlennosti”, 110, 301–312.

Downloads

Published

2014-02-07

How to Cite

Лозовской, А. Ю., Олейник, Д. Ю., Скородумова, О. Б., Гонтар, Т. Б., & Гончаренко, Я. Н. (2014). Development of the normative support for the production of hybrid silica fillers dental composite materials. Eastern-European Journal of Enterprise Technologies, 1(6(67), 45–48. https://doi.org/10.15587/1729-4061.2014.20336

Issue

Vol. 1 No. 6(67) (2014): Technology organic and inorganic substances. Materials Science

Section

Materials Science

License

Copyright (c) 2014 Антон Юрьевич Лозовской, Дарья Юрьевна Олейник, Ольга Борисовна Скородумова, Татьяна Борисова Гонтар, Яна Николаевна Гончаренко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.