Influence release agent on physical and mechanical properties of cold thermoplastic concrete

Authors

  • Виктор Александрович Золотарев Kharkov national automobile highway university str. Petrovskogo, 25, Kharkov, Ukraine, 61002, Ukraine https://orcid.org/0000-0003-2132-9289
  • Максим Александрович Свинарев Kharkov national automobile highway university str. Petrovskogo, 25, Kharkov, Ukraine, 61002, Ukraine https://orcid.org/0000-0002-4136-4295

DOI:

https://doi.org/10.15587/1729-4061.2014.20690

Keywords:

autohesion, slumping abilities, release agent, fluid binders, thermoplastic concrete mixture, cold thermoplastic concrete

Abstract


The methods and techniques of ensuring processability of cold asphalt concrete mixtures were considered, taking into account specific features and technologies of producing a polymeric petroleum binder, also used in producing a colored cold mix. For reducing, the treatment of the mixture with an aqueous solution of a non–ionic surface–active agent, which is compound in the mixture directly during its production, was proposed. The dependences of slumping abilities of mixtures, treated by different amounts of an additive agent on the binder viscosity, were given. The optimum agent content was determined. It reduces slumping abilities of thermoplastic concrete mixtures, and increases the strength of asphalt–concretes, based on these mixtures. The obtained results on water saturation and density show that the agent does not only reduce slumping abilities of mixtures, but also promotes their sealing. It was shown that adding a release agent into mixtures, obtained on certain binder grades, can improve physical and mechanical properties of thermoplastic concretes by increasing viscosity of applied fluid binders.

Author Biographies

Виктор Александрович Золотарев, Kharkov national automobile highway university str. Petrovskogo, 25, Kharkov, Ukraine, 61002

Professor, Dr.Sci.Tech, chief of department

Road-building materials technology

Максим Александрович Свинарев, Kharkov national automobile highway university str. Petrovskogo, 25, Kharkov, Ukraine, 61002

Junior Researcher

Road-building materials technology

References

  1. Перегуд, П. И. Холодный асфальт. Изучение и применение холодного мелкозернистого асфальта в дорожном строительстве [Текст] / П. И. Перегуд. – Ленинград: Гострансиздат, 1934. – 209 с.
  2. Козлова, Е. Н. Холодный асфальтобетон [Текст] / Е. Н. Козлова – М.: Научно-техническое издательство автотранспортной литературы, 1958. – 124 с.
  3. Вешов, Д. Холодный песчаный асфальтовый бетон [Текст] / Д. Вешов // Автомобильные дороги. – 1961. – № 9. – С. 28 – 29.
  4. Надежденский, Н. Холодные способы постройки асфальтовых одежд [Текст] / Н. Надежденский // Транспорт и дороги города. – 1933. - № 6. – С. 23 – 24.
  5. Пат. 2939800 USA. Production of cold mixed asphaltic patting compositions [Текст] / Wilbur E. Fox, Walter A. Los; заявитель и патентообладатель Sinclair Refining Company. - № 626085; заявл. 4.12.1956; опубл. 7.06.1960, 4 Сlaims (106-280)
  6. Пат. 2629669 USA. Сold-rollable paving mix [Текст] / Benjamin A. Anderton, Cliffside Park N. J.; заявитель и патентообладатель Allied Chemical & Dye Corporation. - № 150110; заявление 16.03.1950; опубл. 24.02.1953, 8 Сlaims (106-281)
  7. Гохман, Л. М. Исследование технологических свойств складируемых асфальтобетонных смесей на основе полимербитумных вяжущих [Текст] / Л. М. Гохман, И. И. Капанадзе // Труды СОЮЗДОРНИИ. – 1986. – Совершенствование технологии строительства асфальтобетонных и других черных покрытий. – С. 32 – 39.
  8. Jerome, М. The road of green chemistry [Теxt] / Jerome M., Jean-Pierre A. // European roads. – 2007. - № 10. - p. 27 - 32.
  9. Пат. 0 900 822 European patent application, Int. CI.6 C08K5/101, C08L 95/00. Liant bitumineux, composition et utilisation [Теxt] / Pasquier, Michel; заявитель и патентообладатель Rousset, Jean-Claude Cabinet Netter 40, rue Vignon 75009 Paris (FR). - №98402118.8; заявл. 26.08.1998; опубл. 10.03.1999 Bulletin 1999/10.
  10. Christine, D. Bio-products on the roads [Теxt] / Christine D. // European roads. – 2007. - № 10. - p. 34 - 37.
  11. Пат. 2978351 USA. Paving composition [Теxt] / Harold B. Pullar; заявитель и патентообладатель Jary, Desmond & Parker. - № 738297; заяв. 28.05.1958; опубл. 4.04.1961, 3 Сlaims (117-32)
  12. Козлова, Е. Н. Слеживаемость холодных асфальтобетонных смесей [Текст] / Козлова Е. Н. – М.: Научно - техническое издательство министерства автомобильного транспорта и шоссейных дорог РСФСР, 1959. – 30 с.
  13. Герстманис, А. М. Агрегированная асфальтобетонная смесь [Текст] / А. М. Герстманис, Н. В. Табаков, В. Р. Майер, Н. Е. Ситников // Автомобильные дороги. – 1989. - № 10. – С. 15 – 16.
  14. Космин, А. В. Исследование технологии асфальтового бетона холодного типа [Текст]: дис. … кандидата тех. наук: Космин Александр Витальевич. – Харьков, 1969. – 226с.
  15. Peregud, P. I. (1934). Holodnyj asfal’t. Izuchenie i primenenie holodnogo melkozernistogo asfal’ta v dorozhnom stroitel’stve. Leningrad: Gostransizdat, 209.
  16. Kozlova, E. N. (1958). Holodnyj asfal’tobeton. M.: Nauchno–tehnicheskoe izdatel’stvo avtotransportnoj literatury, 124.
  17. Veshov, D. (1961). Holodnyj peschanyj asfal’tovyj beton. Avtomobil’nye dorogi, 9, 28–29.
  18. Nadezhdenskij, N. (1933). Holodnye sposoby postrojki asfal’tovyh odezhd. Transport i dorogi goroda, 6, 23–24.
  19. Wilbur, E., Fox, Walter, A. (1960). Los Production of cold mixed asphaltic patting compositions. Patent USA 2939800.
  20. Benjamin, A., Anderton, Cliffside, Park, N. J. (1953). Сold–rollable paving mix. Patent 2629669 USA.
  21. Gohman, L. M., Kapanadze, I. I. (1986). Issledovanie tehnologicheskih svojstv skladiruemyh asfal’tobetonnyh smesej na osnove polimerbitumnyh vjazhushhih. Trudy SOJuZDORNII. Sovershenstvovanie tehnologii stroitel’stva asfal’tobetonnyh i drugih chernyh pokrytij, 32 – 39.
  22. Jerome, М., Jean–Pierre, A. (2007). The road of green chemistry. European roads, 10, 27–32.
  23. Pasquier, Michel (1999). Liant bitumineux, composition et utilisation. Patent 0 900 822 European patent application, Int. CI.6 C08K5/101, C08L 95/00/
  24. Christine, D. (2007). Bio–products on the roads. European roads, 10, 34–37.
  25. Harold, B. (1958). Pullar Paving composition. Patent 2978351 USA.
  26. Kozlova, E. N. (1959). Slezhivaemost’ holodnyh asfal’tobetonnyh smesej. M.: Nauchno–tehnicheskoe izdatel’stvo ministerstva avtomobil’nogo transporta i shossejnyh dorog RSFSR, 30.
  27. Gerstmanis, A. M., Tabakov, N. V., Majer, V. R., Sitnikov, N. E. (1989). Agregirovannaja asfal’tobetonnaja smes’. Avtomobil’nye dorogi, 10, 15–16.
  28. Kosmin, A. V. (1969). Issledovanie tehnologii asfal’tovogo betona holodnogo tipa. Har’kov, 226.

Downloads

Published

2014-02-07

How to Cite

Золотарев, В. А., & Свинарев, М. А. (2014). Influence release agent on physical and mechanical properties of cold thermoplastic concrete. Eastern-European Journal of Enterprise Technologies, 1(6(67), 41–44. https://doi.org/10.15587/1729-4061.2014.20690

Issue

Vol. 1 No. 6(67) (2014): Technology organic and inorganic substances. Materials Science

Section

Materials Science

License

Copyright (c) 2014 Виктор Александрович Золотарев, Максим Александрович Свинарев

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.