Measuring signal formation in the bispectral pyrometry
DOI:
https://doi.org/10.15587/1729-4061.2014.20787Keywords:
measuring signal, pyrometer, bispectral pyrometry, CCD, television camera, measurement, temperatureAbstract
The problem of forming the measuring signal in the bispectral pyrometry is considered in the paper. High-temperature technologies become effective only if the technological requirements are met, that, in its turn, is impossible without appropriate industrial gages.
A significant constraint in the field of applying monospectral television measuring devices for controlling temperature modes is the fundamental dependence of measurement results on a priori grounds about the emissivity coefficient of an object and its behavior in the measurement range. In this case, the bispectral pyrometry ensures potentially higher measurement accuracy. But a significant number of issues concerning the bispectral television pyrometry, which are important in theoretical and practical aspects, have not received an adequate interpretation. It means that virtually today there has not been developed potentially the most efficient method for temperature control, which capabilities fully meet the needs of electron-beam technologies for obtaining new materials, laser processing technologies, welding and other related technologies.
The analysis of existing circuits of a multispectral signal formation in the pyrometry was made in the paper. There are circuits with light filters deposited on the matrix, using a polygonal prism or bilens. In the paper, it was suggested using a three-layer matrix for forming a multispectral signal. The main advantage of the circuit for forming the measurement signal is high resolution, as well as the absence of such optical system components as light filters, bilens or prism, which complicate the circuit and cause errors in measurements.
A physical model of forming measurement and output bispectral pyrometer signals was developed. Using the physical model, a mathematical model was developed.
It was concluded that there is a need of further studying properties of bispectral television measuring devices, as well as the influence of slight changes of the emissivity coefficient on errors of temperature measurements.
References
- Порев, Г. В. Підвищення точності телевізійних засобів вимірювання температури поверхні зони плавки [Текст] / Г. В. Порев // Методи та прилади контролю якості. – 2002. – № 9. – С. 39-41.
- Згуровский, Г. М. Вимірювання температури зони розплаву в електронно-променевій технології безтигельної зонної плавки [Текст] / Г. М. Згуровский, Г. В. Порєв // Наукові вісті НТУУ «КПІ». – 2003. – № 3. – С. 93-97.
- Порев, В. А. Телевізійна пірометрія [Текст] / В. А. Порєв. – К. : АВЕРС, 2002. – 196 с.
- Hauer, W., & Zauner, G. (2013, March). High-temperature dual-band thermal imaging by means of high-speed CMOS camera system. In IS&T/SPIE Electronic Imaging (pp. 866103-866103). International Society for Optics and Photonics.
- Estevadeordal, J., Tralshawala, N., & Badami, V. (2013, July). Multi-Color Imaging Pyrometry Techniques for Gas Turbine Engine Applications. In ASME 2013 Fluids Engineering Division Summer Meeting (pp. V002T11A007-V002T11A007). American Society of Mechanical Engineers.
- US Patent № US3971065 (A) ― 1976-07-20. Color imaging array / Bryce E. Bayer, Mar. 05, 1975.
- Direct Image Sensors [Електронний ресурс] : Foveon. – Режим доступу : http://www.foveon.com/.
- Foveon X3-матрица [Електронний ресурс] : Материал из свободной русской энциклопедии «Традиция». – Режим доступу: http://traditio.ru/wiki/Foveon_X3-матрица.
- Foveon X3 [Електронний ресурс] : Материал из Википедии — свободной энциклопедии. – Режим доступу: http://ru.wikipedia.org/wiki/Foveon_X3.
- Маркін, М. О. Біспектральний телевізійний прилад контролю високотемпературних технологій [Текст] / М. О. Маркін, В. А. Порєв // Методи та прилади контролю якості. – 2009. – № 23. – С. 102-105.
- Porev, G. V. (2002). Improving the accuracy of measuring instruments television surface temperature zone melting. Methods and instruments of quality control, 9, 39-41.
- Zhurovskyy, G. M. (2003). Temperature measurement of molten zone in electron beam technology zone melting. Scientific news “KPI”, 3, 93-97.
- Porev, V. A. Television pyrometry (2002). Kyiv, Ukraine. Avers, 196. 4. Hauer, W., Zauner, G. (2013, March). High-temperature dual-band
- thermal imaging by means of high-speed CMOS camera system. In IS&T/SPIE Electronic Imaging. International Society for Optics and Photonics, 866103-866103.
- Estevadeordal, J., Tralshawala, N., Badami, V. (2013, July). MultiColor Imaging Pyrometry Techniques for Gas Turbine Engine Applications. In ASME 2013 Fluids Engineering Division Summer Meeting (pp. V002T11A007-V002T11A007). American Society of Mechanical Engineers.
- US Patent № US3971065 (A) ― 1976-07-20. Color imaging array / Bryce E. Bayer, Mar. 05, 1975.
- Direct Image Sensors : Foveon. Avialable at: http://www.foveon.com/.
- Foveon X3-sensor : From the free Russian encyclopedia “Tradition”. – Avialable at: http://traditio.ru/wiki/Foveon_X3-матрица.
- Foveon X3 : Wikipedia, the free encyclopedia. Avialable at: http://ru.wikipedia.org/wiki/Foveon_X3.
- Markin, M. O., Poryev, V. A. (2009). Bispectrum television control device of high temperature technologies Methods and instruments of quality control, 23, 102-105.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Максим Олександрович Маркін
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.