Исследование условий применения методики эластичной сети при проектировании телекоммуникационных систем

Authors

DOI:

https://doi.org/10.15587/1729-4061.2009.22445

Keywords:

topology synthesis elastic net ring topology telecommunication system

Abstract

The modified elastic net method for solving the problem of backbone ring topology synthesis is offered. This method allows to find the shortest path for network backbone which take into consider internodes data traffic. The modified elastic net method usage condition for solving given problem study in this article experimentally.

Author Biography

Дмитрий Владимирович Агеев, Kharkiv National University of Radio Electronics Lenina 16, Kharkov, Ukraine, 61166

Professor

Department of telecommunication systems

References

  1. Агеев Д.В. Методика синтеза гетерогенной сети передачи данных с кольцевой структурой на магистральном участке // Радиотехника. 2001. Вып. 123. С. 8-16.
  2. Зайченко Ю.П. Структурная оптимизация сетей ЭВМ / Зайченко Ю.П., Гонта Ю.В. К.: Техника, 1986. 168 с.
  3. Агеев Д.В. Синтез сети передачи данных с кольцевой структурой на магистральном участке с использованием методики эластичной нейронной сети // Радиотехника. 2001. Вып. 125. С. 165-169.
  4. R. Durbin. An Analogue Approach to the salesman problem using an elastic net method / R. Durbin, G. Willsshaw // Nature. 1987. N 326. P. 689-691.

Downloads

Published

2009-08-20

How to Cite

Агеев, Д. В. (2009). Исследование условий применения методики эластичной сети при проектировании телекоммуникационных систем. Eastern-European Journal of Enterprise Technologies, 4(11(40), 18–24. https://doi.org/10.15587/1729-4061.2009.22445

Issue

Vol. 4 No. 11(40) (2009): Control systems (part III). Energy-saving technologies and equipment

Section

Control systems

License

Copyright (c) 2014 Дмитрий Владимирович Агеев

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.