Change of form of the deposits of metals being electrodeposited under the influence of a centrifugal force

Authors

  • Олег Борисович Гирин Украинский государственный химико-технологический университет пр. Гагарина, 8, г. Днепропетровск, Украина, 49005, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.2285

Keywords:

Form of deposit, metal being electrodeposited, centrifugal force

Abstract

Change of form of the deposits of metals being electrodeposited under the influence of a centrifugal force including growth of length and thickness of deposits in the direction of the action of the force with modification of their configuration depending on value of the g force is found

Author Biography

Олег Борисович Гирин, Украинский государственный химико-технологический университет пр. Гагарина, 8, г. Днепропетровск, Украина, 49005

Доктор технических наук, профессор, проректор по научной работе, заведующий кафедрой

Кафедра материаловедения

References

  1. Гирин, О. Б. Увеличение плотности электроосаждаемых металлов под действием центробежной силы [Текст] / О. Б. Гирин, И. Д. Захаров // Восточно-Европейский журнал передовых технологий. – 2011. – № 5/5. – С. 4–6.
  2. Гирин, О. Б. Волнообразное течение поверхностных слоев электроосаждаемых металлов под действием центробежной силы [Текст] / О. Б. Гирин // Восточно-Европейский журнал передовых технологий. – 2011. – № 5/5. – С. 22–27.
  3. Оно, А. Затвердевание металлов [Текст] / А. Оно ; пер. с англ. Э. В. Захарченко. – М. : Металлургия, 1980. – 152 с.

Downloads

How to Cite

Гирин, О. Б. (2012). Change of form of the deposits of metals being electrodeposited under the influence of a centrifugal force. Eastern-European Journal of Enterprise Technologies, 6(5(54), 57–63. https://doi.org/10.15587/1729-4061.2011.2285

Issue

Vol. 6 No. 5(54) (2011): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Олег Борисович Гирин

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.