Evolute gearing theory

Authors

  • Анатолий Иванович Павлов Харьковский национальный автомобильно-дорожний университет ул. Петровского, 25, г. Харьков, 61002, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.2307

Keywords:

Еvolute, evolute gearing, radius of curvature

Abstract

The paper proposed a new evolute gearing for the gears. The main advantage of the new gearing to increase contact resistance is achieved by a convex-concave contact of working surfaces of the teeth

Author Biography

Анатолий Иванович Павлов, Харьковский национальный автомобильно-дорожний университет ул. Петровского, 25, г. Харьков, 61002

Доктор технических наук, доцент

Кафедра инженерной и компьютерной графики

References

  1. Литвин Ф.Л. Теория зубчатых зацеплений. / Ф.Л. Литвин – М.: Наука. – 1968 . – 584с.
  2. Павлов А.И. Современная теория зубчатых зацеплений. / А.И.Павлов –Харьков: ХНАДУ, 2005. – 100 с.
  3. Павлов А.И, Построение рабочей поверхности зубьев звездочки цепной передачи. / А.И. Павлов, С.В. Андриенко // Вестник Харьковского национального университета «ХПИ». –Вып.8, т. 3. –Харьков. – 2003. – С. 43-46.
  4. Павлов А.И., Чайка Э.Г. Исследование приведенного радиуса кривизны в нормальном сечении зацепления с выпукло-вогнутым вогнутым контактом обкатной косозубой цилиндрической зубчатой передачи с помощью программного комплекса Vissim./ А.И. Павлов А.И., Э.Г. Чайка. // Зб. Наукових праць “Геометричне та комп’ютерне моделювання”, вип. 2. –Харків. – 2002. – С.108-111.

Downloads

How to Cite

Павлов, А. И. (2012). Evolute gearing theory. Eastern-European Journal of Enterprise Technologies, 6(7(54), 19–21. https://doi.org/10.15587/1729-4061.2011.2307

Issue

Vol. 6 No. 7(54) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Анатолий Иванович Павлов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.