Hysteresis for solving nonlinear problem for an elastic beam structures

Authors

  • А. Д. Шамровский Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, Украина, 69006, Ukraine
  • Т. А. Миняйло Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, Украина, 69006, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.2309

Keywords:

Beam structure, loading process, hysteresis

Abstract

The method of successive approximations is developed and applied. The solution of nonlinear problems for elastic beam structures based on this method is considered. The hysteresis phenomenon is investigated

Author Biographies

А. Д. Шамровский, Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, Украина, 69006

Доктор технических наук, профессор, профессор

Кафедра программного обеспечения автоматизированных систем

Т. А. Миняйло, Запорожская государственная инженерная академия пр. Ленина, 226, г. Запорожье, Украина, 69006

Аспирант

Кафедра программного обеспечения автоматизированных систем

References

  1. Шамровський, О. Д. Розрахунок стержневих конструкцій методом послідовних переміщень із урахуванням геометричної нелінійності [Текст] / О. Д. Шамровський, Д. М. Колесник, Ю. О. Лимаренко// Нові матеріали і технології в металургії і машинобудуванні. – 2009. – №1. – С. 78 –85
  2. Ажгирей, Г.Д. Структурная геология [Текст] / Г.Д. Ажгирей. — Издaтeльство московского университета, 1956. — 493 c.

Downloads

How to Cite

Шамровский, А. Д., & Миняйло, Т. А. (2012). Hysteresis for solving nonlinear problem for an elastic beam structures. Eastern-European Journal of Enterprise Technologies, 6(7(54), 24–28. https://doi.org/10.15587/1729-4061.2011.2309

Issue

Vol. 6 No. 7(54) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 А. Д. Шамровский, Т. А. Миняйло

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.