The theoretical justification for upgrading the friction unit by installing air electromagnetic bearing

Authors

  • Ольга Андриановна Войтович Херсонский национальный технический университет Бериславское шоссе, 24, г. Херсон, Украина, 73008, Ukraine
  • Игорь Анатольевич Селиверстов Херсонский национальный технический университет Бериславское шоссе, 24, г. Херсон, Украина, 73008, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.2312

Keywords:

Roller bearing, air electromagnetic bearing, spindle, rotation speed

Abstract

The performance specifications of rolling bearings, installed in the spindles of ring spinning machines, air electromagnetic  bearings is calculated in this work; the comparative analysis of durability, wear resistance, lifting capacity of given mountings is made

Author Biographies

Ольга Андриановна Войтович, Херсонский национальный технический университет Бериславское шоссе, 24, г. Херсон, Украина, 73008

Кандидат технических наук, доцент

Кафедра основ конструирования

Игорь Анатольевич Селиверстов, Херсонский национальный технический университет Бериславское шоссе, 24, г. Херсон, Украина, 73008

Кандидат технических наук, доцент

Кафедра основ конструирования

References

  1. Пат. 25920 Україна, МПК F 16 С 17/02. Аероелектромагнітний підшипник ковзання / О.П. Костогриз, О.А. Войтович. - № u 2007 04511; заявл. 23.04.2007; опубл. 27.08.2007, Бюл. № 13. – 5с.: ил.
  2. Перель Л.Я. Подшипники качения: Расчет, проектирование и обслуживание опор: справочник/ Л.Я. Перель. – М.: Машиностроение, 1983. – 543 с.
  3. Войтович О.А. Удосконалення технології отримання пряжі кільцевого способу прядіння: автореф. дис. на соискание степени канд.техн.наук: спец. 05.18.19 «Технологія текстильних матеріалів, швейних і трикотажних виробів» / О.А.Войтович. – Херсон, 2009. - 28 с.
  4. Чернавский С.А. Подшипники скольжения/ С.А. Чернавский. - М.: „Машгиз”, 1963.-244с.

Downloads

How to Cite

Войтович, О. А., & Селиверстов, И. А. (2012). The theoretical justification for upgrading the friction unit by installing air electromagnetic bearing. Eastern-European Journal of Enterprise Technologies, 6(7(54), 36–38. https://doi.org/10.15587/1729-4061.2011.2312

Issue

Vol. 6 No. 7(54) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Ольга Андриановна Войтович, Игорь Анатольевич Селиверстов

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.