Determination of cost reduction of treatment of machine parts

Authors

  • Валерий Алексеевич Жовтобрюх ООО “Технический центр “ВариУс” Спуск Калинина, 10, г. Днепропетровск, 49038, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2011.2315

Keywords:

Сost of treatment, mode of cutting, tool

Abstract

The choice of optimal parameters of mechanical treatment of machine parts by the least cost of treatment is made. The specific practical recommendations for improving the technical and economic parameters treatment are given

Author Biography

Валерий Алексеевич Жовтобрюх, ООО “Технический центр “ВариУс” Спуск Калинина, 10, г. Днепропетровск, 49038

Директор

References

  1. Маталин А.А. Технология машиностроения: учебник [Текст] / А.А. Маталин. – Л.: Машиностроение, 1985. – 496 с.
  2. Теоретические основы резания и шлифования материалов: учеб. пособие [Текст]/ А.В. Якимов, Ф.В. Новиков, Г.В. Новиков, Б.С. Серов, А.А. Якимов. – Одесса: ОГПУ, 1999. – 450 с.
  3. Новиков Ф.В. Разработка эффективных технологий механической обра-ботки деталей машин [Текст] / Ф.В. Новиков, В.А. Жовтобрюх // Автомобильный транспорт: сб. научн. тр. – Х.: ХНАДУ, вып. 29, 2011. – 212-215.
  4. Робочі процеси високих технологій в машинобудуванні: навч. посібник [Текст] / За редакцією А.І. Грабченко – Харків: ХДПУ, 1999. – 436 с.

Downloads

How to Cite

Жовтобрюх, В. А. (2012). Determination of cost reduction of treatment of machine parts. Eastern-European Journal of Enterprise Technologies, 6(7(54), 51–53. https://doi.org/10.15587/1729-4061.2011.2315

Issue

Vol. 6 No. 7(54) (2011): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Валерий Алексеевич Жовтобрюх

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.