Usage of possibilities AutoCAD 2010 in operation of the engineer-designer

Authors

  • Елена Евгеньевна Поморцева Кафедра информатики и компьютерной техники Харьковский национальный экономический университет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2545

Keywords:

automated design engineering system, two-dimensional drawing, unit, hatching

Abstract

Questions of an intensification of work of the designers using at designing AutoCAD are considered. Passage to new level of designing at the expense of usage of new possibilities of version 2010 will allow to spare considerably time and to receive real incomes.

Author Biography

Елена Евгеньевна Поморцева, Кафедра информатики и компьютерной техники Харьковский национальный экономический университет

Кандидат технических наук, доцент

References

  1. Полещук Н. AutoCAD 2010 - издательство ”BHV-Санкт-Петербург”, 2009. - 800 с.
  2. Погорелов В.И. AutoCAD 2010. Самое необходимое - издательство ”BHV-Санкт-Петербург”, 2009. - 400 с

Downloads

How to Cite

Поморцева, Е. Е. (2012). Usage of possibilities AutoCAD 2010 in operation of the engineer-designer. Eastern-European Journal of Enterprise Technologies, 1(4(43), 15–17. https://doi.org/10.15587/1729-4061.2010.2545

Issue

Vol. 1 No. 4(43) (2010): Information technology

Section

Information technology

License

Copyright (c) 2014 Елена Евгеньевна Поморцева

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.