About one method of the automated estimation of acoustic properties of the hall the geometrical acoustics method

Authors

  • Виктория Валерьевна Усик Кафедра технологии и автоматизации производства радиоэлектронных и электронно-вычислительных средств Харьковский национальный университет радиоэлектроники; ООО «Мюзикленд», Ukraine
  • Игорь Григорьевич Мягкий ООО «Мюзикленд», Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2552

Keywords:

acoustic properties of space, geometric theory, software, sound-reflecting surface

Abstract

The researches of space-planning decisions auditoria to provide optimal acoustic properties in terms of geometrical acoustics. Developed software that allows you to build and verify the proposed sound-reflecting surface in CAD AutoCad.

Author Biographies

Виктория Валерьевна Усик, Кафедра технологии и автоматизации производства радиоэлектронных и электронно-вычислительных средств Харьковский национальный университет радиоэлектроники; ООО «Мюзикленд»

Кандидат технических наук, доцент; главный инженер

Игорь Григорьевич Мягкий, ООО «Мюзикленд»

Главный инженер

References

  1. Йордан В. Л. «Акустическое проектирование концертных залов и театров». – Москва: Стройиздат, 1985.
  2. Макриненко Л. И. «Акустика помещений общественных зданий». – Москва: Стройиздат, 1986.
  3. Ковригин С. Д. «Архитектурно-строительная акустика». – Москва: «Высшая школа», 1980.
  4. Акустика: Справочник / под ред. М.А. Сапожкова. - М.: Радио и связь, 1989.

Downloads

How to Cite

Усик, В. В., & Мягкий, И. Г. (2012). About one method of the automated estimation of acoustic properties of the hall the geometrical acoustics method. Eastern-European Journal of Enterprise Technologies, 1(4(43), 39–45. https://doi.org/10.15587/1729-4061.2010.2552

Issue

Vol. 1 No. 4(43) (2010): Information technology

Section

Information technology

License

Copyright (c) 2014 Виктория Валерьевна Усик, Игорь Григорьевич Мягкий

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.