Synthesis mechatronic hydrounit subject to variable load
DOI:
https://doi.org/10.15587/1729-4061.2010.2591Keywords:
mechatronic hydraulic unit, synthesis, correcting linkAbstract
This article represents the description of hydraulic synthesis with the production and solving an optimization problem for the designated dynamic criteria to reduce pressure. Technical implementation of the results leads to create mechatronic hydraulic unit, which contains information, energy, electronic and electromechanical subsystems.References
- Тихенко В.Н. разработка гидропривода с регулируемым приводным двигателем насосной установки // Промислова гідравліка і пневматика. – 2006.- №1(11).- С.84-86.
- Лимонов Л.Г., Маргулис В.П., Хромачев Г.И. Применение серийных преобразователей частоты фирмы ABB с прямым управлением моментом электродвигателя // Електромашинобудування та електрообладення. Проблеми автоматизованого електропривода. Теорія і практика.-К.:Техніка.- 2006.- С.30-32.
- Чермалых В.М., Чермалых А.В., Майданских И.Я. Исследование динамики и энергетических показателей асинхронного электропривода с векторным управлением методом виртуального моделирования. // Проблемы автоматизированного електропривода. Теория и практика. – Харьков: НТУ “ХПИ” – 2008. – С. 41-45.
- Перельмутер В.М. Прямое управление моментом и током двигателей переменного тока. – Харьков: Основа, 2004. – 210с.
- Методы классической и современной теории автоматического управления: Учебник в 5-и тт.; изд. Перераб. И доп. Т.З: синтез регуляторов систем автоматического управления / Под ред. К.А. Пункова и Н.Д. Егунова.- М.: изд. МГТУ им. Н.Э. Баумана, 2004. – 616с.
- Кiнчур О.Ф. Моделювання електроприводу насосной станції водопостачаня // Проблемы автоматизированного электропривода. Теория и практика.- Харьков: НТУ “ХПИ” – 2008.-С.241-242.
- Проспект фирмы Lenze. Промышленный электропривод переменного тока.- С.123.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Зиновий Яковлевич Лурье, Эдуард Георгиевич Братута, Игорь Михайлович Федоренко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.