Determining the mode characteristics of voltage regulator with capacitive load
DOI:
https://doi.org/10.15587/1729-4061.2022.259935Keywords:
voltage regulator, fully controlled semiconductor gate, static reactive power compensatorAbstract
The tasks of dynamic compensation of reactive power are solved by means of flexible AC transmission systems using power electronics devices. The object of this study is a variable voltage regulator with a capacitive load. This paper considered the problem of the efficiency of phase voltage regulation on the capacitor battery to use it as a source to compensate for reactive power. The results of the study are presented, which justify the effectiveness of the technique for obtaining a dynamic source of reactive power based on the use of a thyristor voltage regulator with a capacitive load. A comparative study of two regimes of the regulator was carried out: the phase-controlled mode of closing fully controlled semiconductor gates and the phase-controlled mode for opening single-core semiconductor gates. Analytical expressions for angular characteristics of power according to the main harmonics are derived. It is shown that under the first mode the current through the capacitor is capacitive, which makes it possible to obtain a thyristor-adjustable capacitor battery for dynamic compensation of reactive power in power supply systems. It was found that under the second mode, simultaneously with the regulation of reactive power, there is a phenomenon of consumption from the active power supply network according to the main harmonics. This means that the regulation of current through an ideal capacity using ideal phase-controlled semiconductor gates is accompanied by the consumption of the active component of the current from the power supply network. The resulting component of active power in the electrical circuit without active resistances is proposed to be called "active artificial shear power". The results have been confirmed by studies on virtual models
References
- Sanjeevikumar, P., Sharmeela, C., Holm-Nielsen, J. B., Sivaraman, P. (2020). Power Quality in Modern Power Systems. Academic Press. doi: https://doi.org/10.1016/c2019-0-05409-x
- Muuss, F., Hemdan, N. G. A., Kurrat, M., Unger, D., Engel, B. (2015). Dynamic virtual reactive power plant in active distribution networks. 2015 IEEE Eindhoven PowerTech. doi: https://doi.org/10.1109/ptc.2015.7232356
- Pudjianto, D., Djapic, P., Strbac, G., Stojkovska, B., Ahmadi, A. R., Martinez, I. (2019). Integration of distributed reactive power sources through Virtual Power Plant to provide voltage control to transmission network. 25th International Conference on Electricity Distribution (CIRED-2019). doi: https://doi.org/10.34890/933
- Bertram, R., Schnettler, A. (2017). A control model of virtual power plant with reactive power supply for small signal system stability studies. 2017 IEEE Manchester PowerTech. doi: https://doi.org/10.1109/ptc.2017.7980838
- Dynamic reactive power compensation. Available at: https://electrical-engineering-portal.com/power-quality-dynamic-reactive-power-compensation
- Brian, K., Johnson. (2018). Fundamental Concepts of Dynamic Reactive Compensation and HVDC Transmission. University of Idaho.
- Hingorani, N. G., Gyugyi, L. (2017). Static Shunt Compensators: SVC and STATCOM. Understanding FACTS. Wiley 135-207.doi: https://doi.org/10.1109/9780470546802.ch5
- Moghbel, M., Masoum, M. A. S., Fereidouni, A., Deilami, S. (2018). Optimal Sizing, Siting and Operation of Custom Power Devices With STATCOM and APLC Functions for Real-Time Reactive Power and Network Voltage Quality Control of Smart Grid. IEEE Transactions on Smart Grid, 9 (6), 5564–5575. doi: https://doi.org/10.1109/tsg.2017.2690681
- Hock, R. T., de Novaes, Y. R., Batschauer, A. L. (2018). A Voltage Regulator for Power Quality Improvement in Low-Voltage Distribution Grids. IEEE Transactions on Power Electronics, 33 (3), 2050–2060. doi: https://doi.org/10.1109/tpel.2017.2693239
- Mitra, P., Venayagamoorthy, G. K., Corzine, K. A. (2011). SmartPark as a Virtual STATCOM. IEEE Transactions on Smart Grid, 2 (3), 445–455. doi: https://doi.org/10.1109/tsg.2011.2158330
- Compensators – SVC, SSSC and so on using power electronics. Available at: https://www.edgefxtech.com/blog/different-types-of-compensators-in-power-electronics/
- Rashid, M. H. (2011). Power electronics handbook: Devices, Circuits, and Applications. Elsevier. Available at: https://www.sciencedirect.com/book/9780123820365/power-electronics-handbook
- Fediv, Y., Sivakova, O., Korchak, M. (2020). Multi Operated Virtual Power Plant in Smart Grid. Advances in Science, Technology and Engineering Systems Journal, 5 (6), 256–260. doi: https://doi.org/10.25046/aj050630
- Fediv, Y., Sivakova, O., Korchak, M. (2019). Model of Virtual Source of Reactive Power for Smart Electrical Supply Systems. 2019 IEEE 20th International Conference on Computational Problems of Electrical Engineering (CPEE). doi: https://doi.org/10.1109/cpee47179.2019.8949159
- Ängquist, L. (2002). Synchronous Voltage Reversal Control of Thyristor Controlled Series Capacitor. Stockholm. Available at: https://www.diva-portal.org/smash/get/diva2:9191/fulltext01.pdf
- Sivakova, O., Fediv, Ye. (2010). Osoblyvosti fazovoho tyrystornoho rehuliuvannia statychnykh dzherel reaktyvnoi potuzhnosti. Tekhnichni visti, 1 (31), 48–50.
- MathWorks. Available at: https://www.mathworks.com/help/index.html
- Emanuel, A. E. (2010). Power Definitions and the Physical Mechanism of Power Flow. John Wiley. doi: https://doi.org/10.1002/9780470667149
- IEEE Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions. doi: https://doi.org/10.1109/ieeestd.2010.5439063
- Solomchak, O. (2013). Reactive power of displacement and distortion. Modern scientific research and their practical application. Available at: https://www.researchgate.net/publication/264728984
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Yevhen Fediv, Olha Sivakova
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.