Experimental evaluation of the influence of excessive electric current on the fire hazard of lithium-ion power cell
DOI:
https://doi.org/10.15587/1729-4061.2022.263001Keywords:
fire hazard, lithium-ion power cell, excess current, burning temperaturAbstract
Panasonic NCR18650B (LiNi0.8Co0.15Al0.05O2) lithium-ion power cell (LIPC) and its performance after exposure to excess direct current are considered in this paper. The basic fire hazard indicators (element ignition temperature, flame temperature, element heating time, etc.) were experimentally established and mathematically confirmed for the examined LIPC.
According to the results of experimental studies, the time of occurrence of an irreversible thermochemical reaction in a lithium-ion power cell was determined depending on the different DC current strengths. Additionally, the critical temperature of the onset of an irreversible thermochemical reaction and the total combustion temperature of the element have been established. The application of the Joule-Lenz and Fourier laws allowed for a mathematical notation of the dependence (influence) of DC strength over time and the heating of the element to a critical temperature.
The heating time of Panasonic NCR18650B LIPC (LiNi0.8Co0.15Al0.05O2) to a critical temperature of 100–150 °C under the influence of excess current was experimentally established and mathematically confirmed.
The determined critical indicators of the element (temperature, time, etc.) make it possible to further devise a number of necessary regulatory documents that will allow them to be certified, tested, and, in general, to better understand the dangers that they may pose. A mathematical model was built, which, taking into account the geometrical parameters of the element, makes it possible to calculate the onset of the critical temperature of such elements with excellent geometric parameters without conducting experimental studies
References
- Haider, W. H. (2020). Estimates of Total Oil & Gas Reserves in The World, Future of Oil and Gas Companies and SMART Investments by E & P Companies in Renewable Energy Sources for Future Energy Needs. Paper presented at the International Petroleum Technology Conference. doi: https://doi.org/10.2523/iptc-19729-ms
- Mananga, E. S. (2020). Lithium-ion Battery and the Future. Recent Progress in Materials, 03 (02), 1–1. doi: https://doi.org/10.21926/rpm.2102012
- Nykvist, B., Nilsson, M. (2015). Rapidly falling costs of battery packs for electric vehicles. Nature Climate Change, 5 (4), 329–332. doi: https://doi.org/10.1038/nclimate2564
- Huang, Z., Li, H., Mei, W., Zhao, C., Sun, J., Wang, Q. (2020). Thermal Runaway Behavior of Lithium Iron Phosphate Battery During Penetration. Fire Technology, 56 (6), 2405–2426. doi: https://doi.org/10.1007/s10694-020-00967-1
- Lazarenko, O., Loik, V., Shtain, B., Riegert, D. (2018). Research on the Fire Hazards of Cells in Electric Car Batteries. Bezpieczeństwo i Technika Pożarnicza, 52, 108–117. doi: https://doi.org/10.12845/bitp.52.4.2018.7
- Chombo, P. V., Laoonual, Y. (2020). A review of safety strategies of a Li-ion battery. Journal of Power Sources, 478, 228649. doi: https://doi.org/10.1016/j.jpowsour.2020.228649
- Ruiz, V., Pfrang, A., Kriston, A., Omar, N., Van den Bossche, P., Boon-Brett, L. (2018). A review of international abuse testing standards and regulations for lithium ion batteries in electric and hybrid electric vehicles. Renewable and Sustainable Energy Reviews, 81, 1427–1452. doi: https://doi.org/10.1016/j.rser.2017.05.195
- Lazarenko, O., Pospolitak, V. (2021). Methods of testing lithium-ion batteries for fire hazard. Fire Safety, 39, 49–55. doi: https://doi.org/10.32447/20786662.39.2021.06
- Ren, D., Feng, X., Lu, L., He, X., Ouyang, M. (2019). Overcharge behaviors and failure mechanism of lithium-ion batteries under different test conditions. Applied Energy, 250, 323–332. doi: https://doi.org/10.1016/j.apenergy.2019.05.015
- Mevawalla, A., Panchal, S., Tran, M.-K., Fowler, M., Fraser, R. (2020). Mathematical Heat Transfer Modeling and Experimental Validation of Lithium-Ion Battery Considering: Tab and Surface Temperature, Separator, Electrolyte Resistance, Anode-Cathode Irreversible and Reversible Heat. Batteries, 6 (4), 61. doi: https://doi.org/10.3390/batteries6040061
- Li, J., Sun, D., Jin, X., Shi, W., Sun, C. (2019). Lithium-ion battery overcharging thermal characteristics analysis and an impedance-based electro-thermal coupled model simulation. Applied Energy, 254, 113574. doi: https://doi.org/10.1016/j.apenergy.2019.113574
- Bhundiya, H., Hunt, M., Drolen, B. (2018). Measurement of the effective radial thermal conductivities of 18650 and 26650 lithium-ion battery cells. TFAWS 2018. Available at: https://tfaws.nasa.gov/wp-content/uploads/TFAWS18-IN-08_Paper.pdf
- Kimm Y., Siegel, J. B., Stefanopoulou, A. G. (2013). A computationally efficient thermal model of cylindrical battery cells for the estimation of radially distributed temperatures. 2013 American Control Conference. doi: https://doi.org/10.1109/acc.2013.6579917
- Bubbico, R., D’Annibale, F., Mazzarotta, B., Menale, C. (2019). Thermal Model of Cylindrical Lithium-ion Batteries. Chemical Engineering Transactions, 74, 1291–1296. doi: https://doi.org/10.3303/CET1974216
- Li, L., Ju, X., Zhou, X., Peng, Y., Zhou, Z., Cao, B., Yang, L. (2021). Experimental Study on Thermal Runaway Process of 18650 Lithium-Ion Battery under Different Discharge Currents. Materials, 14 (16), 4740. doi: https://doi.org/10.3390/ma14164740
- Xu, B., Kong, L., Wen, G., Pecht, M. G. (2021). Protection Devices in Commercial 18650 Lithium-Ion Batteries. IEEE Access, 9, 66687–66695. doi: https://doi.org/10.1109/access.2021.3075972
- Sun, P., Bisschop, R., Niu, H., Huang, X. (2020). A Review of Battery Fires in Electric Vehicles. Fire Technology, 56 (4), 1361–1410. doi: https://doi.org/10.1007/s10694-019-00944-3
- Pazen, O., Tatsiy, R. (2021). Mathematical modeling of the heat transfer process in the system of multilayer cylindrical solid bodies considering internal sources of heat. Scientific Bulletin: Сivil Protection and Fire Safety, 1 (9), 66–75. doi: https://doi.org/10.33269/nvcz.2020.1.66-75
- Tatsiy, R., Stasiuk, M., Pazen, O., Vovk, S. (2018). Modeling of boundary-value problems of heat conduction for multilayered hollow cylinder. 2018 International Scientific-Practical Conference Problems of Infocommunications. Science and Technology (PIC S&T). doi: https://doi.org/10.1109/infocommst.2018.8632131
- Muenzel, V., Hollenkamp, A. F., Bhatt, A. I., de Hoog, J., Brazil, M., Thomas, D. A., Mareels, I. (2015). Comment on “A Comparative Testing Study of Commercial 18650-Format Lithium-Ion Battery Cells” [J. Electrochem. Soc., 162, A1592 (2015)]. Journal of The Electrochemical Society, 162 (12), Y11–Y12. doi: https://doi.org/10.1149/2.0241512jes
- Wang, D., Bao, Y., Shi, J. (2017). Online Lithium-Ion Battery Internal Resistance Measurement Application in State-of-Charge Estimation Using the Extended Kalman Filter. Energies, 10 (9), 1284. doi: https://doi.org/10.3390/en10091284
- Duh, Y.-S., Tsai, M.-T., Kao, C.-S. (2016). Characterization on the thermal runaway of commercial 18650 lithium-ion batteries used in electric vehicle. Journal of Thermal Analysis and Calorimetry, 127 (1), 983–993. doi: https://doi.org/10.1007/s10973-016-5767-1
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Oleksandr Lazarenko, Taras Berezhanskyi, Vitalii Pospolitak, Oleg Pazen
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.