Forecasting of diesel engines durability

Authors

  • Д.М. Барановський Кафедра транспортних технологій Кременчуцький державний університет імені Михайла Остроградського, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2674

Keywords:

durability, diesel engines, tribosystems, destruction concept

Abstract

The tribosystems diesel engines durability depends on speed of defects accumulation in a material, and process of defects accumulation is casual. Therefore, the choice of materials and manufacturing techniques or elements modification of tribosystems diesel engines of a special self-propelled rolling stock of the railways is the most important stage on which accident of display of their durability. In work, on the basis of the kinetic concept of destruction of tribosystems diesel engines materials the model for forecasting of their durability is received.

Author Biography

Д.М. Барановський, Кафедра транспортних технологій Кременчуцький державний університет імені Михайла Остроградського

Кандидат технічних наук, доцент

References

  1. Барановський Д.М. Проблема довговічності дизелів засобів транспорту // Вісник КДПУ імені Михайла Остроградського. – 2009. – Вип. 5/2009 (58) ч. 1. – С. 96-99.
  2. Сухарев Э.А. Эксплуатационная надежность машин. Теория, методология, моделирование: Учебное пособие. – Ровно, НУВХП, 2006. – 192 с.
  3. Барановський Д.М. Загальний підхід до оцінки та прогнозування ресурсу дизелів засобів транспорту // Восточно-Европейский журнал передовых технологий. – 2009. – №4/10(40). – С. 49-52.
  4. Канарчук В.Е. Долговечность и износ двигателей при динамических режимах работы. – К.: Наукова думка, 1978. – 256 с.
  5. Когаев В.П., Гадалина И.В. Суммирование усталостных повреждений при вероятностных расчетах долговечности // Вестник машиностроения, 1989. – №7. – С. 3-7.

Downloads

Published

2010-04-06

How to Cite

Барановський, Д. (2010). Forecasting of diesel engines durability. Eastern-European Journal of Enterprise Technologies, 2(5(44), 71–73. https://doi.org/10.15587/1729-4061.2010.2674

Issue

Vol. 2 No. 5(44) (2010): The applied physics and materials technology. The applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Д.М. Барановський

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.