The production technology of engines of new generation

Authors

  • В.А. Гейкин Научно-исследовательский институт технологии и организации производства двигателей (НИИД) ФГУП «ММПП «Салют» г. Москва, Russian Federation
  • Н.И. Шаронова Научно-исследовательский институт технологии и организации производства двигателей (НИИД) ФГУП «ММПП «Салют» г. Москва, Russian Federation

DOI:

https://doi.org/10.15587/1729-4061.2010.2750

Keywords:

engine, production engineering, pressure, casting, grinding.

Abstract

Habits of manufacturing methods of basic parts and units of the gas-turbine engine of the fifth generation, connected with application «blisk» designs of the compressor, of brush condensation, ionic сhemistry-thermal processing of working surfaces of toothed wheels, manufacture and the control of splined joints are observed.

Author Biographies

В.А. Гейкин, Научно-исследовательский институт технологии и организации производства двигателей (НИИД) ФГУП «ММПП «Салют» г. Москва

Доктор технических наук, профессор, директор

Н.И. Шаронова, Научно-исследовательский институт технологии и организации производства двигателей (НИИД) ФГУП «ММПП «Салют» г. Москва

Кандидат технических наук, начальник отдела

Downloads

Published

2010-04-06

How to Cite

Гейкин, В., & Шаронова, Н. (2010). The production technology of engines of new generation. Eastern-European Journal of Enterprise Technologies, 3(2(45), 11–13. https://doi.org/10.15587/1729-4061.2010.2750

Issue

Vol. 3 No. 2(45) (2010): Modern technologies in gas-turbine construction. Part I

Section

Modern technologies in the gas-turbine

License

Copyright (c) 2014 В.А. Гейкин, Н.И. Шаронова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.