Determination of optimal transient in the anti-surge control system of the gas compressor unit
DOI:
https://doi.org/10.15587/1729-4061.2014.27793Keywords:
centrifugal supercharger, surge, performance, anti-surge control, optimal transientAbstract
The paper examines the problem of determining the optimal transient in the anti-surge control system of the gas compressor unit with gas turbine drive on the example of the C-6.3 type centrifugal supercharger. The problem of determining the switching points, constructing the optimal transient was considered. A method to improve the anti-surge control system performance in conditions of the booster compressor station of underground gas storage was proposed since performance of anti-surge control system of the gas compressor unit is a key factor to improve the booster compressor station reliability.
The defined optimal transient in the anti-surge control system of the gas compressor unit with gas turbine drive and transient time show that they significantly differ from the transient in the system for the case when nonoptimal control action is supplied to the control object input.
References
1. Fabri, I. (1967). Rotating stale inaxial flow compressors. Internal Aerodynamics, Institution of Mechanical Engineers. (Conference Cambridge. Session 5: Unsteady flow effects, Paper 9), 96–110.
2. Gеorgants, A. (1994). Review of compressor Aerodynamic Instabilies. National Aeronautical Establishment, Canada, 125–134.
3. Sparks, C. R. (1983). On the transient in tradition of centrifugal compressors and their piping systems. Trens of the ASME. Journal of Engineering for power, 891–901. doi: 10.1115/1.3227498
4. Gerasimenko, V. P. (2001). To improve the sustainability of natural gas systems with compressor. Avіats. kosm.tehnіka i tehnologіya, 23–45.
5. Gіrenko, S. G. (2008). Method avtomatizovanogo Zahist compressors dotiskuvalnoї kompresornoї stantsії pіdzemnogo skhovischa gas surge od. Oil and Gas energy, 1 (6), 43–47.
6. Becker, R., Shimko, R., Sementsov, G., Blyaut, Y., Girenko, S., Petesh, M., Sukach, A., Repeta, A. (2009). A method for protecting the compressor from surge, 22, 10.
7. Slobodyan, A. V. (2007). System peredpompazhnogo Poperedjennia that viznachennya robochoї point gazoperekachuvalnogo unit type SCC-10 bazі mіkroprotsesornogo Comptroller MІK-51. Oil and Gas energy, 3, 31–34.
8. Blyaut, J. (2008). Energy-saving technology for surge control of centrifugal pumping units booster station underground gas storage. Oil and Gas energy, 2, 33–38.
9. Mamonov, O., Targonsky, V. (2006). Introduction of energy saving technologies in the anti-surge control blowers, 1 (37), 6–7.
10. Lagoyda, А., Blyaut, J., Lesiv, E., Sementsov, G. (2012). Analysis of the dynamic properties of a centrifugal supercharger compressor turbine drive as control object. Oil and Gas energy, 2 (18), 72–85.
11. Olejnikov, V. (1968). Collection of problems and examples in the theory of automatic control (optimal, extreme and software management). High School, 200.
12. Zaitsev, G. (1989). Automatic Control Theory and regulirovaniya. High School, 431.
13. Blyaut, J. (2013). Automatic identification of the characteristics of a surge of gas pumping units with gas turbine drive for effective surge control, 20.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Андрій Іванович Лагойда, Георгій Никифорович Семенцов
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
