Research of high-frequency remagnetization model in laminated magnetic cores of electromechanical and electromagnetic energy converters
DOI:
https://doi.org/10.15587/1729-4061.2023.286002Keywords:
charged magnetic wire, high-frequency remagnetization processes, eddy currents, surface effectAbstract
The object of research in the work is charged magnetic conductors of electric machines and transformers.
Laminated magnetic wire together with windings are important active parts of electric machines that participate in electromechanical energy conversion.
The reliability of the entire machine is mainly determined by the actual condition of the inter-sheet insulation. Violation of the insulation causes parasitic eddy current circuits, which increases the specific losses, and also significantly affects the additional heating of the magnet wire and winding.
The normative method for determining the quality of the charged core is the assessment of specific losses at a frequency of 50 Hz and an induction of 1 T, which should not exceed 2.5–4 W/kg. To determine local damage to the core, methods of local heating and fixation of overheating sites are used, which should not exceed 45 °C compared to the main part of the magnetic core.
In the work, a two-dimensional field mathematical model of a charged magnetic circuit is developed. This makes it possible to carry out electromagnetic calculations in a near-real magnetic conductor, taking into account the variability of magnetic permeability, hysteresis, and the interaction of currents in adjacent plates of the magnetic conductor with each other, the so-called "proximity effect".
On the basis of the developed models, graphs of current distribution and distribution of magnetic induction in one, two and three sheets were obtained. The resulting graphs show how the effect of current displacement increases with increasing frequency, where at a frequency of 100 kHz the magnetic induction density in the middle of the sheet goes to zero. The results of the research confirm the correctness of the model development in comparison with the classical calculation models also given, which allows them to be used for further research of high-frequency processes in charged magnetic circuits of electric machines
References
- Colonel, Wm., McLyman, T. (2017). Magnetic Core Selection for Transformers and Inductors. A User's Guide to Practice and Specifications. CRC Press, 672. doi: https://doi.org/10.1201/9781315214856
- Rudenberg, R. (1950). Transient performance of electric power systems. McGraw-Hill.
- Yang, G., Zhang, S., Zhang, C. (2020). Analysis of Core Loss of Permanent Magnet Synchronous Machine for Vehicle Applications under Different Operating Conditions. Applied Sciences, 10 (20), 7232. doi: https://doi.org/10.3390/app10207232
- Boubaker, N., Matt, D., Enrici, P., Nierlich, F., Durand, G. (2019). Measurements of Iron Loss in PMSM Stator Cores Based on CoFe and SiFe Lamination Sheets and Stemmed From Different Manufacturing Processes. IEEE Transactions on Magnetics, 55 (1), 1–9. doi: https://doi.org/10.1109/tmag.2018.2877995
- Zhang, S., Ducharne, B., Takeda, S., Sebald, G., Uchimoto, T. (2021). Low-frequency behavior of laminated electric steel sheet: Investigation of ferromagnetic hysteresis loops and incremental permeability. Journal of Magnetism and Magnetic Materials, 538, 168278. doi: https://doi.org/10.1016/j.jmmm.2021.168278
- Shah, S. B., Osemwinyen, O., Rasilo, P., Belahcen, A., Arkkio, A. (2018). Thermographic Measurement and Simulation of Power Losses Due to Interlaminar Contacts in Electrical Sheets. IEEE Transactions on Instrumentation and Measurement, 67 (11), 2628–2634. doi: https://doi.org/10.1109/tim.2018.2829321
- Aydin, U., Martin, F., Rasilo, P., Belahcen, A., Haavisto, A., Singh, D. et al. (2019). Rotational Single Sheet Tester for Multiaxial Magneto-Mechanical Effects in Steel Sheets. IEEE Transactions on Magnetics, 55 (3), 1–10. doi: https://doi.org/10.1109/tmag.2018.2889238
- Urabinahatti, C., Ahmad, S. S., Narayanan, G. (2018). Magnetic Characterization of Ferromagnetic Alloys for High Speed Electric Machines. 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). doi: https://doi.org/10.1109/pedes.2018.8707819
- Nguedjang Kouakeuo, S. H., Ducharne, B., Solignac, A., Morel, L., Raulet, M. A. et al. (2021). Non-invasive local magnetic hysteresis characterization of a ferromagnetic laminated core. Journal of Magnetism and Magnetic Materials, 527, 167783. doi: https://doi.org/10.1016/j.jmmm.2021.167783
- Zhao, H., Eldeeb, H. H., Zhang, Y., Zhang, D., Zhan, Y., Xu, G., Mohammed, O. A. (2021). An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply. IEEE Transactions on Industry Applications, 57 (4), 4336–4346. doi: https://doi.org/10.1109/tia.2021.3072930
- Sirotic, I., Kovacic, M., Stipetic, S. (2021). Methodology and Measurement Setup for Determining PWM Contribution to Iron Loss in Laminated Ferromagnetic Materials. IEEE Transactions on Industry Applications, 57 (5), 4796–4804. doi: https://doi.org/10.1109/tia.2021.3094501
- Kulan, M. C., Baker, N. J., Liogas, K. A., Davis, O., Taylor, J., Korsunsky, A. M. (2022). Empirical Implementation of the Steinmetz Equation to Compute Eddy Current Loss in Soft Magnetic Composite Components. IEEE Access, 10, 14610–14623. doi: https://doi.org/10.1109/access.2022.3148593
- Chumack, V., Kovalenko, M., Tymoshchuk, O., Stulishenko, A., Ihnatiuk, Y. (2023). Design of a multilink system for calculating high-frequency processes in electric machines with mesh windings. Eastern-European Journal of Enterprise Technologies, 3 (8 (123)), 54–63. doi: https://doi.org/10.15587/1729-4061.2023.282375
- Ostroverkhov, M., Chumack, V., Kovalenko, M., Kovalenko, I. (2022). Development of the control system for taking off the maximum power of an autonomous wind plant with a synchronous magnetoelectric generator. Eastern-European Journal of Enterprise Technologies, 4 (2 (118)), 67–78. doi: https://doi.org/10.15587/1729-4061.2022.263432
- Ostroverkhov, M., Chumack, V., Tymoshchuk, O., Kovalenko, M., Ihnatiuk, Y. (2022). Designing a voltage control system of the magnetoelectric generator with magnetic flux shunting for electric power systems. Eastern-European Journal of Enterprise Technologies, 5 (5 (119)), 16–25. doi: https://doi.org/10.15587/1729-4061.2022.265861
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Mykhailo Kovalenko, Vadim Chumack, Oksana Tymoshchuk, Mykhailo Kovalenko, Volodymyr Bazenov, Yevhen Ihnatiuk, Andrii Stulishenko
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
