COMPUTATIONAL INVESTIGATION OF INFLUENCE OF COOLING OF BLADES ON AEROELASTICITY OF THE TURBOMACHINE CASCADE
DOI:
https://doi.org/10.15587/1729-4061.2010.3009Keywords:
aerodynamics in turbomachines, heat transfer, aeroelasticity, aerothermoelasticityAbstract
Results of numerical simulation of the flow in lattices of fluctuating turbine blades with various ways of cooling with the help before the developed method are presented. Influence of a way of cooling of a blade on aeroelastic characteristics of a lattice is shown.References
- Verhoosel C.V. Uncertainty and Reliability Analysis of Fluid– Structure Stability Boundaries / C.V. Verhoosel, T.P. Scholcz, S.J. Hulshoff, M.A. Gutierrez // AIAA Journal. – 2009. – 47, № 1. – P. 91-104.
- Mani K. Adjoint-Based Sensitivity Formulation for Fully Coupled Unsteady Aeroelasticity Problems / K. Mani, D.J. Mavriplis // AIAA Journal. – 2009. – 47, № 8. – P. 1902- 1915.
- Гнесин В.И. Численный анализ влияния соотношения чисел лопаток статора и ротора на нестационарные нагрузки и режимы колебаний лопаток / В.И. Гнесин, Л.В. Колодяжная // Вестник НТУ «ХПИ»: Энергетические и теплотехнические процессы и оборудование. – 2009. – № 3. – С. 23-32.
- Гнесин В.И. Численное исследование аероупругих характеристик лопаточного венца турбомашины, работающей на нерасчетном режиме. / Гнесин В.И., Быков Ю. А. // Пробл. машиностроения. – 2004. – Т.7, №1 – С. 31-40.
- Menter F.R. Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications. // AIAA Journal – 1994. – 32, № 8. – P. 1598-1605.
- Быков Ю.А. Численное моделирование течения в решетке колеблющихся профилей с учетом теплообмена. / Пробл. машиностроения. – 2009. – Т.12, №5 – С. 36-41.
- Bolcs A. Aeroelasticity in Turbomachines. Comparison of Theoretical and Experimental Cascade Results / Bolcs A., Fransson T.H. // Communication du Laboratorie de Thermique Appliquee et de Turbomachines, Lausanne, EPFL. – 1986. – №13. – 230 p.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Юрий Адольфович Быков
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
