Identifying the effect of low-cycle fatigue of reinforced concrete structures on the properties of the reducing coefficient under the action of a seismic type load
DOI:
https://doi.org/10.15587/1729-4061.2024.306889Keywords:
seismic resistance, reinforced concrete structures, low-cycle fatigue, reduction and ductility coefficientsAbstract
The object of consideration is seismic design, and the subject of the study is the determination of the reduction coefficient. One of the important problems of earthquake-resistant design is to determine the effect of low-cycle fatigue of reinforced concrete on the reduction coefficient and determine its optimal value. This problem is not disclosed and is not specifically taken into account in the standards for earthquake engineering when determining the maximum bearing capacity of types of structures due to the lack of study of the issue. To solve the problem, a series of experimental studies were carried out on low-cycle fatigue of reinforced concrete bending elements and frame units. The range of results of the reduction coefficient values and the degree of influence of monocyclic fatigue on the properties of the reduction coefficient are obtained.
A feature and characteristic of the results obtained is that the reduction coefficient Rμ depends on the nature of the hysteresis deformation pattern and the plastic life of structural elements estimated by the plasticity coefficient μ, which is significantly influenced by low-cycle fatigue manifested at peak accelerations of strong seismic impacts. The above test algorithm, the feature and characteristics of the results obtained made it possible to solve the problem under study.
The results obtained are accepted for practical use in the action of seismic loads: on the calculation of strength taking into account new low-cycle coefficients, reduction coefficients for determining the spectra of design reactions and seismic loads, taking into account energy absorption. New reduction coefficients are proposed for determining the spectra of calculated reactions and seismic loads
References
- EN 1998-1 (2004). (English): Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings [Authority: The European Union Per Regulation 305/2011, Directive 98/34/EC, Directive 2004/18/EC]. Available at: https://www.phd.eng.br/wp-content/uploads/2015/02/en.1998.1.2004.pdf
- Newmark, N., Rosenbluet, E. (1980). Fundamentals of Earthquake-Resistant Construction. Moscow: Stroyizdat, 344.
- Borges, J. F., Ravara, A. (1978). Design of reinforced concrete structures for seismic areas. Moscow: Stroyizdat, 135.
- Polyakov, S. V. (1983). Earthquake-resistant structures of buildings. (Fundamentals of the theory of seismic resistance). Moscow: Higher School, 305.
- Baryshnikov, A. Ya., Shevchenko, B. N., Valovoy, A. I. (1985). Low cycle fatigue of concrete during compression. Beton and reinforced concrete, 4, 27–28.
- Stavrov, G. N., Rudenko, V. V., Fedoseev, A. A. (1985). Strength and deformation of concrete at repeated static loads. Concrete and reinforced concrete, 01, 133–134.
- Rudenko, V. V. (1980). Out-of-center loading of concrete and reinforced concrete elements with a small number of repeated loads. Proceedings of Higher Educational Institutions. Construction and Architecture, 4, 12–13.
- Rudenko, V. V. (1981). Operation of non-centrally compressed elements. Concrete and reinforced concrete, 11, 5–6.
- Babich, E. M., Pogorelyak, A. P., Zalesov, A. S. (1981). Work of elements on transverse force with a few repeated loads. Concrete and reinforced concrete, 6, 8–9.
- Effects of repeated loading of materials and structures (1966). Proc. RILEM. Vol. I-IV. Mexico,
- Abakanov, M. S. (2013). Strength of reinforced concrete structures under low-cycle loads of seismic type. Earthquake-resistant construction. Safety of building structures, 05, 30–34.
- Abakanov, M. S. (2008). Low-cycle strength of nodes of two-branch reinforced concrete columns of one-story industrial buildings under loads of seismic type. Khabarshy-Bulletin of the Kazakh Head Academy of Architecture and Civil Engineering, 2 (28), 99–109.
- Gvozdev, A. A., Dmitriev, S. A., Gushcha, Yu. P., Zalesov, A. S., Mulin, N. M., Chistyakov, E. A. (1978). New in the design of concrete and reinforced concrete structures. Moscow: Stroyizdat, 204.
- Akbiev, R. T., Abakanov, M. S. (2023). Operational assessment of the consequences of the devastating earthquake in Turkey (according to the official published data of the media and the global network). Geology and Environment, 3, 35–51. https://doi.org/10.26516/2541-9641.2023.1.35
- Chopra, A. K. (2005). Earthquake dynamics of structures: a primer. Oakland: Earthquake Engineering Research Institute. Available at: https://archive.org/details/earthquakedynami0000chop_ed02
- Newmark, N. M., Hall, W. J. (1982). Earthquake spectra and design. California. Available at: https://tuxdoc.com/download/1982-newmark-amp-hall-eeri-earthquake-spectra-and-design-5_pdf
- Xie, L., Wu, J., Huang, Q. (2017). Experimental Study on Low-Cycle Fatigue Performance of Weld-Free Buckling-Restrained Braces. Journal of Earthquake Engineering, 22 (8), 1392–1414. https://doi.org/10.1080/13632469.2017.1286622
- Tong, C., Wu, J., Hua, K., Xie, L. (2020). Low-Cycle Fatigue Life Estimation Curve for Buckling-Restrained Braces Based on Cumulative Plastic Deformation. Journal of Earthquake Engineering, 26 (6), 2773–2801. https://doi.org/10.1080/13632469.2020.1772152
- Bas, E. E., Moustafa, M. A., Pekcan, G. (2020). Compact Hybrid Simulation System: Validation and Applications for Braced Frames Seismic Testing. Journal of Earthquake Engineering, 26 (3), 1565–1594. https://doi.org/10.1080/13632469.2020.1733138
- Sechi, G. J., Lopane, F. D., Hendriks, E. (2022). Mapping seismic risk awareness among construction stakeholders: The case of Iringa (Tanzania). International Journal of Disaster Risk Reduction, 82, 103299. https://doi.org/10.1016/j.ijdrr.2022.103299
- Dong, H., Qin, J., Cao, W., Zhao, L. (2022). Seismic behavior of circular CFST columns with different internal constructions. Engineering Structures, 260, 114262. https://doi.org/10.1016/j.engstruct.2022.114262
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Mirken Abakanov, Izim Dyussembayev, Mermurat Nigmetov
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.