DEVICE FOR PIPEFACING
DOI:
https://doi.org/10.15587/1729-4061.2010.3152Keywords:
factor, criterion, technological process, the perturbing forces, fluctuation, vibration, processing quality, balanced system of forces, noiseAbstract
The article shows the possibility of creating devices for without vibration machining the pipe ends, which is to balance the disturbing sources, thus providing better products and lower the noise level emanating from the vibrating piece.References
- Блехман И.И. Вибрационная механика. – М.: Физматлит, 1994. – 400с.
- Варава Л.М., Двоскин П.М. Резка труб и баллонов: Учебник для ПТУ. – М.: Металлургия, 1983. – 280с.
- Жуков Э.Л., Козарь И.И., Мурашкин С.Л., Розовский Б.Я., Дегтярев В.В., Соловейчик А.М. Основы технологии машиностроения: учеб пособ. для вузов. В 2 кн. Кн. 1. / Жуков Э.Л., Козарь И.И., Мурашкин С.Л. и др.: Под ред. С.Л. Мурашкина. – М.: Высш. шк., 2003. – 278с.
- Остафьев В.А., Антонюк В.С., Тымчик Г.С. Диагностика процесса металлобработки. – К.: Техніка, 1991. – 152с.
- Патент на корисну модель UA 49739 U. МПК В23В 5/08. Пристрій для обробки кінців труб / Ю.І. Сичов, Б.Г. Лях, В.В. Самчук. Заявл. 16.11.2009; Опубл. 11.05.2010, Бюл. № 9. 2010р. – 3с.
- Пуховский Е.С., Таврит Г.Э., Лещенко М.И. Безвибрационное многолезвийное резание. – К.: Техніка, 1982. – 114с.
- Ю.І. Сичов, Б.Г. Лях, В.І. Неко, В.В. Самчук. Один з напрямків розробки безвібраційних обробних комплексів // Восточно- Европейский журнал передовых технологий. – Харьков: Технологический Центр. 2010. № 2/5 (44) с. 38-41.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Юрій Іванович Сичов, Анатолій Петрович Тарасюк, Бенгард Григорович Лях, Віктор Іванович Неко, Володимир Володимирович Самчук
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
