DYNAMIC LIFT FACTORS SUBJECT TO WEIGHTS AND ROPE GUIDE PULLEY

Authors

  • Татьяна Николаевна Осипова Кафедра «Металлорежущее оборудование и транспортные системы» Украинская инженерно-педагогическая академия г. Харьков, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3159

Keywords:

dynamics, differential equations, analytical solution, oscillograms

Abstract

The moments of the elastic forces in spring linkages of three-mass mechanical system are determined by analytical method taking into account weight of pulley guide.

Author Biography

Татьяна Николаевна Осипова, Кафедра «Металлорежущее оборудование и транспортные системы» Украинская инженерно-педагогическая академия г. Харьков

Аспирантка

References

  1. Голубенцев А.Н. Динамика переходных процессов со многими массами. – М.: Машгиз, 1959. – 146 с.
  2. Ловейкин В.С., Нестеров А.П. Динамическая оптимизация подъемных машин. – Луганск: Вид – во СНУ, 2002. – 368 с.
  3. Тимошенко С.П., Янч Д.Х., Уивер У. Колебания в инженерном деле. – М.: Машиностроение,1985. – 472 с.
  4. Кожевников С.Н. Динамика нестационарных процессов в машинах. – К.: Наук. Думка, 1986. – 285 с.
  5. Федорова З.М., Лукин И.Ф., Нестеров А.П. Подъемники. – Киев: Вища школа, 1976. – 296 с.

Downloads

Published

2010-09-30

How to Cite

Осипова, Т. Н. (2010). DYNAMIC LIFT FACTORS SUBJECT TO WEIGHTS AND ROPE GUIDE PULLEY. Eastern-European Journal of Enterprise Technologies, 5(5(47), 54–56. https://doi.org/10.15587/1729-4061.2010.3159

Issue

Vol. 5 No. 5(47) (2010): The applied physics and materials technology. The applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Татьяна Николаевна Осипова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.