Building a model of choosing water supply rate to cool a tank in the case of a fire
DOI:
https://doi.org/10.15587/1729-4061.2025.323197Keywords:
spill fire, tank heating, heat flow, water cooling, optimizationAbstract
The object of this study is the process of liquid burning in a spill, and the subject of the study is the temperature distribution along the wall of a vertical steel tank when it is heated under the thermal influence of a fire and cooled by water. The conventional approach to cooling vertical steel tanks with petroleum products with water during a fire is based on cooling the wall along the entire half-perimeter from the fire side. Instead, it is proposed to cool only that part of the tank wall that is heated above a certain limit value. In this case, the intensity of water supply for cooling is chosen so that the temperature of the tank wall does not exceed this value. The proposed approach is based on a system of equations consisting of a heat balance equation for the tank wall, heat and mass balance equations for the water film flowing down the tank wall. These equations take into account heat exchange by radiation and convection with the fire and the environment. An optimization problem has been constructed, the criterion of which is the minimum water consumption, and the restriction is not exceeding the wall temperature of the specified limit value.
An algorithm for determining the optimal intensity of water supply for cooling the tank wall has been developed. At the first stage, a reasonable intensity of water supply is determined, which ensures that the wall temperature does not exceed the limit value. At the second stage, the dichotomy method is used to determine the minimum possible intensity at which the specified condition remains fulfilled. The example of a diesel fuel spill shows that the application of the proposed approach makes it possible to reduce water consumption for cooling the tank by almost 3.5 times. This, in turn, means reducing the number of equipment and personnel involved for localization and elimination of the fire
References
- Raja, S., Tauseef, S. M., Abbasi, T., Abbasi, S. A. (2018). Risk of Fuel Spills and the Transient Models of Spill Area Forecasting. Journal of Failure Analysis and Prevention, 18 (2), 445–455. https://doi.org/10.1007/s11668-018-0429-1
- Vasilchenko, A., Otrosh, Y., Adamenko, N., Doronin, E., Kovalov, A. (2018). Feature of fire resistance calculation of steel structures with intumescent coating. MATEC Web of Conferences, 230, 02036. https://doi.org/10.1051/matecconf/201823002036
- Reniers, G., Cozzani, V. (2013). Features of Escalation Scenarios. Domino Effects in the Process Industries, 30–42. https://doi.org/10.1016/b978-0-444-54323-3.00003-8
- Amin, Md. T., Scarponi, G. E., Cozzani, V., Khan, F. (2024). Improved pool fire-initiated domino effect assessment in atmospheric tank farms using structural response. Reliability Engineering & System Safety, 242, 109751. https://doi.org/10.1016/j.ress.2023.109751
- Kustov, M. V., Kalugin, V. D., Tutunik, V. V., Tarakhno, E. V. (2019). Physicochemical principles of the technology of modified pyrotechnic compositions to reduce the chemical pollution of the atmosphere. Voprosy Khimii i Khimicheskoi Tekhnologii, 1, 92–99. https://doi.org/10.32434/0321-4095-2019-122-1-92-99
- Popov, O., Iatsyshyn, A., Kovach, V., Artemchuk, V., Kameneva, I., Taraduda, D. et al. (2020). Risk Assessment for the Population of Kyiv, Ukraine as a Result of Atmospheric Air Pollution. Journal of Health and Pollution, 10 (25). https://doi.org/10.5696/2156-9614-10.25.200303
- Loboichenko, V., Strelec, V. (2018). The natural waters and aqueous solutions express-identification as element of determination of possible emergency situation. Water and Energy International, 61 (9), 43–50. Available at: http://repositsc.nuczu.edu.ua/handle/123456789/10156
- Sun, X., Huang, H., Zhao, J., Song, G. (2022). Experimental Study of the Effect of Slope on the Spread and Burning Characteristics of a Continuous Oil Spill Fire. Fire, 5 (4), 112. https://doi.org/10.3390/fire5040112
- Li, Y., Meng, Y., Song, X., Zhang, L., Shuai, J. (2024). Modelling study of the spread of liquid fuel spill fires using shallow water equations. Journal of Loss Prevention in the Process Industries, 87, 105227. https://doi.org/10.1016/j.jlp.2023.105227
- Abramov, Y., Basmanov, O., Oliinik, V., Khmyrov, I., Khmyrova, A. (2022). Modeling the convective component of the heat flow from a spill fire at railway accidence. EUREKA: Physics and Engineering, 6, 128–138. https://doi.org/10.21303/2461-4262.2022.002702
- Kovalov, A., Otrosh, Y., Rybka, E., Kovalevska, T., Togobytska, V., Rolin, I. (2020). Treatment of Determination Method for Strength Characteristics of Reinforcing Steel by Using Thread Cutting Method after Temperature Influence. Materials Science Forum, 1006, 179–184. https://doi.org/10.4028/www.scientific.net/msf.1006.179
- Elhelw, M., El-Shobaky, A., Attia, A., El-Maghlany, W. M. (2021). Advanced dynamic modeling study of fire and smoke of crude oil storage tanks. Process Safety and Environmental Protection, 146, 670–685. https://doi.org/10.1016/j.psep.2020.12.002
- Oliinyk, V., Basmanov, O., Romanyuk, I., Rashkevich, O., Malovyk, I. (2024). Building a model of heating an oil tank under the thermal influence of a spill fire. Ecology, 4 (10 (130)), 21–28. https://doi.org/10.15587/1729-4061.2024.309731
- Basmanov, O., Oliinyk, V., Afanasenko, K., Hryhorenko, O., Kalchenko, Y. (2024). Building a model of oil tank water cooling in the case of fire. Eastern-European Journal of Enterprise Technologies, 5 (10 (131)), 53–61. https://doi.org/10.15587/1729-4061.2024.313827
- Saber, A., El-Nasr, M. A., Elbanhawy, A. Y. (2022). Generalized formulae for water cooling requirements for the fire safety of hydrocarbon storage tank farms. Journal of Loss Prevention in the Process Industries, 80, 104916. https://doi.org/10.1016/j.jlp.2022.104916
- Abramov, Y., Basmanov, O., Salamov, J., Mikhayluk, A., Yashchenko, O. (2019). Developing a model of tank cooling by water jets from hydraulic monitors under conditions of fire. Eastern-European Journal of Enterprise Technologies, 1 (10 (97)), 14–20. https://doi.org/10.15587/1729-4061.2019.154669
- Saber, A., Abo El-Nasr, M., Elbanhawy, A. Y. (2021). Assessment of Cooling Water and Spacing Sensitivities for Fire Propagation Prevention in Cylindrical Fuel Tank Farms. Journal of Failure Analysis and Prevention, 21 (5), 1808–1820. https://doi.org/10.1007/s11668-021-01236-1
- Voroncov, E. G., Tananayko, Yu. M. (1972). Teploobmen v zhidkostnyh plenkah. Kyiv: Tehnika, 194.
- NAPB 05.035–2004. Instruktsiya shchodo hasinnia pozhezh u rezervuarakh iz naftoiu ta naftoproduktamy. Kyiv. Available at: https://zakon.isu.net.ua/sites/default/files/normdocs/instrukciya_schodo_gasinnya_pozhezh_u_rezervuarakh_iz_naftoyu.pdf
- Abramov, Y., Basmanov, O., Oliinik, V., Khmyrov, I. (2022). Justifying the experimental method for determining the parameters of liquid infiltration in bulk material. Eastern-European Journal of Enterprise Technologies, 4 (10 (118)), 24–29. https://doi.org/10.15587/1729-4061.2022.262249

Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Volodymyr Oliinyk, Oleksii Basmanov, Olga Shevchenko, Anastasia Khmyrova, Ivan Rushchak

This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.