Mathematical model of heat-hydrodynamic state of the multichamber furnace during the baking of electrode blanks

Authors

  • Антон Янович Карвацький National technical university of Ukraine «Kyiv polytechnic institute» Peremogy Avenue 37, Kyiv, Ukraine, 03056, Ukraine
  • Ігор Валерійович Пулінець National technical university of Ukraine «Kyiv polytechnic institute» Peremogy Avenue 37, Kyiv, Ukraine, 03056, Ukraine
  • Ігор Леонідович Шилович National technical university of Ukraine «Kyiv polytechnic institute» Peremogy Avenue 37, Kyiv, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3316

Keywords:

Multichamber furnace, gas release, schedule of baking

Abstract

The physical and mathematical models of heat-hydrodynamic state of the chamber of multichamber baking furnace are developed with influence of radiation heat transfer and combustion action of the natural gas

Author Biographies

Антон Янович Карвацький, National technical university of Ukraine «Kyiv polytechnic institute» Peremogy Avenue 37, Kyiv, Ukraine, 03056

Doctor degree of technical sciences, professor

Chemical, polymeric and silicate engineering department

Ігор Валерійович Пулінець, National technical university of Ukraine «Kyiv polytechnic institute» Peremogy Avenue 37, Kyiv, Ukraine, 03056

Graduate student

Chemical, polymeric and silicate engineering department

Ігор Леонідович Шилович, National technical university of Ukraine «Kyiv polytechnic institute» Peremogy Avenue 37, Kyiv, Ukraine, 03056

Candidate degree of technical sciences, associate professor

Chemical, polymeric and silicate engineering department

References

  1. Power saving at production of electrode products [Текст] / Ye.N. Panov, S.V. Kutuzov, A.Ya. Karvatsky [et al.] // XVII Intern. Conf. «Aluminium of Siberia», V Conf. «Metallurgy of Non-Ferrous and Rare Metals», VII Symp. «Gold of Siberia», (Krasnoyarsk, Russia, Sept. 7–9, 2011) : Proceed. of the Intern. Congress, Krasnoyarsk : «Verso», 2011. — P. 412—423.
  2. Малахов С. А. Совершенствование технологи обжига углеграфитовой продукции в многокамерных печах обжига закрытого типа: автореф. дис. на соиск. учен. степени канд. техн. наук : спец. 05.16.02 «Металлургия черных, цветных и редких металлов» / С. А. Малахов. — Владикавказ, 2004. — 30 с.
  3. Шибалов С. Н. Совершенствование тепловых процессов с целью повышения качества обжига заготовок из углеграфитовых материалов: автореф. дис. на соиск. учен. степени канд. техн. наук : спец. 05.16.02 «Металлургия черных, цветных и редких металлов» / С. Н. Шибалов. — М., 2004. — 30 с.
  4. Riedhammer. Carbon baking technology. Closed type baking furnace. [Електронний ресурс ]. — Дата доступу : квіт. 2011 р. — Режим доступу :
  5. http://www.riedhammer.de/System/00/00/95/9566/ed_enUS/Internetversion.pdf.
  6. Poinsot T. Theoretical and numerical combustion [Текст] / Thierry Poinsot, Denis Veynante. — 2nd ed. — Philadelphia : Edwards, 2005. — 522 p.
  7. A New Eddy-Viscosity Model for High Reynolds Number Turbulent Flows - Model Development and Validation [Текст] / T.-H. Shih, W. W. Liou, A. Shabbir, Z. Yang, J. Zhu // Computers Fluids. — 1995. — Vol. 24, No. 3. — P. 227—238.
  8. Henkes R. A. W. M. Natural Convection Flow in a Square Cavity Calculated with Low-Reynolds-Number Turbulence Models [Текст] / R. A. W. M. Henkes, F. F. van der Flugt, C. J. Hoogendoorn // Int. J. Heat Mass Transfer. — 1991. — Vol. 34 — P. 1543—1557.
  9. Magnussen B. F. On mathematical models of turbulent combustion with special emphasis on soot formation and combustion [Текст] / B. F. Magnussen, B. H. Hjertager // In 16th Symp. (Int'l.) on Combustion. The Combustion Institute. — Pittsburgh, 1976 — P. 719—727.
  10. Spalding D. B. Mixing and chemical reaction in steady confined turbulent flames [Текст] / D. B. Spalding // In 13th Symp. (Int'l.) on Combustion. The Combustion Institute. — Pittsburgh, 1971 — P. 649—657.

Published

2012-02-01

How to Cite

Карвацький, А. Я., Пулінець, І. В., & Шилович, І. Л. (2012). Mathematical model of heat-hydrodynamic state of the multichamber furnace during the baking of electrode blanks. Eastern-European Journal of Enterprise Technologies, 1(4(55), 33–37. https://doi.org/10.15587/1729-4061.2012.3316

Issue

Section

Mathematics and Cybernetics - applied aspects