Researches of cavitation in torque flow pump by the method of visual research

Authors

  • Олександр Григорович Гусак Кафедра прикладної гідроаеромеханіки Сумський державний університет, Ukraine
  • Олександр Іванович Котенко Кафедра прикладної гідроаеромеханіки Сумський державний університет, Ukraine
  • Віктор Федорович Герман Кафедра прикладної гідроаеромеханіки Сумський державний університет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3355

Keywords:

cavitation, pump, visual research, cavitation characteristic

Abstract

In the article the results of visual researches of origin and development of cavitation in running part of the torque flow pump of the type «Turo» are presented, in particular, set the cavitations zone, defined by their size.

Author Biographies

Олександр Григорович Гусак, Кафедра прикладної гідроаеромеханіки Сумський державний університет

Кандидат технічних наук, доцент

Олександр Іванович Котенко, Кафедра прикладної гідроаеромеханіки Сумський державний університет

Кандидат технічних наук, доцент

Віктор Федорович Герман, Кафедра прикладної гідроаеромеханіки Сумський державний університет

Кандидат технічних наук, доцент

References

  1. Карелии В.Я. Кавитационные явления в центробежных и осевых насосах –М: Машиностроение, 1975. – 336 с.
  2. Котенко А.И. Оценка кавитационных качеств свободновихревых насосов / Герман В.Ф // Вісник СумДУ Суми.- 2008.- № 2 (10).- С. 81 – 84.

Downloads

Published

2010-11-10

How to Cite

Гусак, О. Г., Котенко, О. І., & Герман, В. Ф. (2010). Researches of cavitation in torque flow pump by the method of visual research. Eastern-European Journal of Enterprise Technologies, 6(7(48), 7–9. https://doi.org/10.15587/1729-4061.2010.3355

Issue

Vol. 6 No. 7(48) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Олександр Григорович Гусак, Олександр Іванович Котенко, Віктор Федорович Герман

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.