The research of vane pump durability characteristic by means of COSMOSWorks

Authors

  • Ольга Василівна Алексенко Кафедра інформатики Сумський державний університет, Ukraine
  • Катерина Анатоліївна Омеляненко Кафедра інформатики Сумський державний університет, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.3363

Keywords:

model, plate, simulation, COSMOSWorks

Abstract

In the article the results of calculation experiment for the analysis of durability of plate of the plate pump are presented. The range of free end of plate height is determined. The mathematical model is realized by facilities of module COSMOSWorks, which built-in in SolidWorks.

Author Biographies

Ольга Василівна Алексенко, Кафедра інформатики Сумський державний університет

Кандидат технічних наук, доцент

Катерина Анатоліївна Омеляненко, Кафедра інформатики Сумський державний університет

Аспірант

References

  1. Алямовский А.А. SolidWorks2007/2008. Компьютерное моделирование в инженерной практике. – СПб.: БХВ-Петербург, 2008. – 1040 с.
  2. Павлов С., К вопросу о классификации MCAE-систем. Часть ІІІ. [Текст] / Береза Ю. // CAD/CAM/CAE Observer. – 2009. – № 4 (48) – С.64-75.
  3. Зайченко И.З, Пластинчатые насосы и гидромоторы[Текст] / Мышлевский П.М.– М.: Машиностроение, 1970. – 229 с.

Downloads

Published

2010-11-10

How to Cite

Алексенко, О. В., & Омеляненко, К. А. (2010). The research of vane pump durability characteristic by means of COSMOSWorks. Eastern-European Journal of Enterprise Technologies, 6(7(48), 34–37. https://doi.org/10.15587/1729-4061.2010.3363

Issue

Vol. 6 No. 7(48) (2010): Energy saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Ольга Василівна Алексенко, Катерина Анатоліївна Омеляненко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.