Control information interaction various CAD/CAM/CAE systems

Authors

  • Наталья Ромуальдовна Кнырик National University of Shipbuilding named after admiral Makarov Heroes of Stalingrad Ave, 9, Nikolaev, Ukraine, 54 009, Ukraine
  • Игорь Леонидович Михелев National University of Shipbuilding named after admiral Makarov Heroes of Stalingrad Ave, 9, Nikolaev, Ukraine, 54 009, Ukraine
  • Евгений Юрьевич Беркунский National University of Shipbuilding named after admiral Makarov Heroes of Stalingrad Ave, 9, Nikolaev, Ukraine, 54 009, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3593

Keywords:

Neutral file formats, various CAD/CAM/CAE systems, data exchange, standardization of formats

Abstract

The neutral file format used to data exchange between automated systems is investigated. The comparative analysis based on various criteria is executed

Author Biographies

Наталья Ромуальдовна Кнырик, National University of Shipbuilding named after admiral Makarov Heroes of Stalingrad Ave, 9, Nikolaev, Ukraine, 54 009

Senior lecturer

Department of information management systems and technologies

Игорь Леонидович Михелев, National University of Shipbuilding named after admiral Makarov Heroes of Stalingrad Ave, 9, Nikolaev, Ukraine, 54 009

Ph.D., assosiate professor

Department of information management systems and technologies

Евгений Юрьевич Беркунский, National University of Shipbuilding named after admiral Makarov Heroes of Stalingrad Ave, 9, Nikolaev, Ukraine, 54 009

Senior lecturer

Department of information management systems and technologies

References

  1. Кошкин К.В. Компьютеризированные интегрированные производства: основы организации и примеры использования [Текст]/ К.В.Кошкин, А.С.Суслов, С.М.Хальнов, В.В.Шишканов, под ред. проф. К.В. Кошкина. – Николаев: видавництво НУК. – 2006. – 180с.
  2. Международные стандарты обмена данными [Электронный ресурс]: учебное пособие/ Л.И. Гришанова – Санкт-Петербург: СПБГУАП. – 2011. – Режим доступа: http://www.salogistics.ru/students/suai_2011/index.html – Название с экрана.
  3. Норенков И.П. Информационная поддержка наукоемких изделий. CALS-технологии [Текст]/ И.П.Норенков, П.К.Кузьмик – М.: Изд-во МГТУ им. Н.Э. Баумана. – 2002. – 320с.
  4. Чечетка А. Формат JT как основа единой интероперабельной платформы разработки [Электронный ресурс]/ А.Чечетка, К.Кекурс // Журн. CAD/CAM/CAE Observer – 2007. – №1 (31) – с.25 – 29. . – Режим доступа: http://www.cadcamcae.lv/hot/JT_P1_n31_p25.pdf – Название с экрана.
  5. White Paper: 3D Formats in the Field of Engineering - a Comparison [Электронный ресурс]/ Dr. Arnulf Fröhlich // Журн. PROSTEP AG – 2011. – Режим доступа: http://isicad.ru/uploads/http___www.prostep.pdf – Название с экрана.

Downloads

Published

2012-02-01

How to Cite

Кнырик, Н. Р., Михелев, И. Л., & Беркунский, Е. Ю. (2012). Control information interaction various CAD/CAM/CAE systems. Eastern-European Journal of Enterprise Technologies, 1(11(55), 20–24. https://doi.org/10.15587/1729-4061.2012.3593

Issue

Vol. 1 No. 11(55) (2012): Integrated strategic management, project management and software development companies and territories

Section

Integrated strategic management, project management and software development companies and territorial

License

Copyright (c) 2014 Наталья Ромуальдовна Кнырик, Игорь Леонидович Михелев, Евгений Юрьевич Беркунский

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.