Asystem design of the information model of project management in themanufacturing process

Authors

DOI:

https://doi.org/10.15587/1729-4061.2015.37192

Keywords:

automated design system, design process, industrial process, information model

Abstract

For a purposeful management of designing technical engineering objects, we suggest that design should be considered as a manufacturing process. Its model is built according to a hierarchicalblockprinciple and a “top-down” approach.

The data sets on the componentsof the design process are grouped in blocks according to the accepted division of the design process into stages, steps, design operations, and design procedures.Due to the diversity and collective performance of design operations, we suggest dividing them into industrial procedures as the smallest structural units of the industrial process and information description that are carried out by one performer. Respectively, industrial procedures description occupies the lowest level in the description of each design procedure. Industrial design procedures are singled out according to the obligatory requirement that only one specialist should make the finished product that is subject to evaluation and external control.

The suggested structurally homogeneous model provides an easy and reliable program implementation with the use of a relational data model due to the third normal form. The model comprises practically available properties of the industrial process and underlies design monitoring and managerial decisions making as to supervision of performers involved in the designprocess.

Author Biographies

Вікторія Петрівна Захарченко, Sumy State University Rymskogo-Korsakova 2, Sumy, Ukraine, 40007

PhD student

Department of Computer Science

Віктор Григорович Неня, Sumy State University Rymskogo-Korsakova 2, Sumy, Ukraine, 40007

PhD, Associate Professor

Department of Computer Science

References

  1. Arik, M., Zurn, S. M., Bar-Cohen, A. et al. (1999). Development of CAD Model for MEMS Micropumps. Technical Proceedings of the 1999. International Conference on Modeling and Simulation of Microsystem, 651–654.
  2. Chow, Y. L., Tang, W. C. (2001). Development of Cad Formulas of Integrated Circuit Components- Fuzzy Em Formulation Followed By Rigorous Derivation. Journal of Electromagnetic Waves and Applications, 15 (8), 1097–1119. doi:10.1163/156939301x00445
  3. Simolowo, E. O. (2012). The Development of CAD Software for Manufacturing Flat-Face and Roller Cam Systems. Advanced Materials Research, 628, 298–303. doi: 10.4028/www.scientific.net/amr.628.298
  4. Aaen, P. H., Pla, J. A., Balanis, C. A. (2005). On the development of CAD techniques suitable for the design of high-power RF transistors. IEEE Transactions on Microwave Theory and Techniques, 53 (10), 3067–3074. doi:10.1109/tmtt.2005.855129
  5. Peng, W., Gero, J. S. (2007). Computer-Aided Design Tools that Adapt. Computer-Aided Architectural Design Futures (CAADFutures), 417–430. doi:10.1007/978-1-4020-6528-6_31
  6. Ayodeji, S., Adejuyigbe, S. (2009). Development of Cad Software for Wheel Chair Design. Jnl Sci Tech, 28 (3), 82–93. doi:10.4314/just.v28i3.33110
  7. Zhang, L., Zhang, H., Li, Y. (2008). The New Development of CAD in Clothing. Computer and Information Science, 1 (3). 104–106. doi: 10.5539/cis.v1n3p104
  8. Matin, I., Hadžistevic, M., Hodolič, J., Vukelić, Dj., Tadić, B. (2010). Development of CAD/CAE system for MOLD design. Journal of Production Engineering, 13 (1), 61–64.
  9. Syryamkin, V. I., Bogomolov, E. N., Brazovsky, V. V., Bureev, A. S., Glushkov, G. S., Vasiliev, A. V. (2013). Computer-Aided Design of X-Ray Microtomographic Scanners. ACT, 02 (03), 83–90. doi:10.4236/act.2013.23015
  10. Pedagoru, V. M., Kumar, Dr. M. (2014) An Intelligent Feature Recognition Methodology Study for 2.5 D Prismatic Parts. International Journal of Computer Engineering and Technology, 5 (4), 119–125.
  11. Sheldrake, J. (2002). Management Theory. Cengage Learning EMEA, 2nd edition, 272.
  12. Renna, P. (2012). Production and Manufacturing System Management: Coordination Approaches and Multi-site Planning. IGI Global, 1st edition, 375.
  13. Edinaya sistema konstruktorskoy dokumentatsii. Mezhgosudarstvennyie standartyi (2001). Moscow: IPK Izdatelstvo standartov, 161.
  14. Norenkov, I. P., Manichev, V. B. (1990). Osnovyi teorii i postroeniya SAPR. M.: Vyisshaya shkola, 335.
  15. Tanik, U. (2008). Architecting Automated Design Systems. VDM Verlag, 408.
  16. Tarasenko, F. P. (2004) Prikladnoy sistemnyiy analiz (Nauka i iskusstvo resheniya problem). Tomsk: Iz-vo Tom.un-ta, 186.
  17. Gibson, J., Scherer, W., Gibson, W. (2007). How to Do Systems Analysis (Wiley Series in Systems Engineering and Management). Wiley-Interscience, 1st edition, 360.
  18. Hoffer, J., George, J., Valacich, J. (2010). Modern Systems Analysis and Design. Prentice Hall, 6th edition, 576.
  19. Greene, J. (2013). Industrial Engineering: Theory, Practice & Application: Business and Production Management, Productivity and Capacity. CreateSpace Independent Publishing Platform, 412.
  20. Kuzmin, A. V. (2001) Teoreticheskie osnovyi sistem upravleniya diskretnogo deystviya. Ulyanovsk: ulyanovskiy gos. tehn. un-t, 98.
  21. Turner, L., Weickgenannt, A. (2008). Accounting Information Systems: Controls and Processes. Wiley, 1st edition, 72.
  22. Rithie, C. (2002). Relational database principles. London-New York: Continuum, 2nd edition, 298.
  23. Atzeni, P., De Antonellis, V. (1993). Relational database theory. Redwood: The Benjamin/Cummings Publishing Company, Inc., 389.

Downloads

Published

2015-02-27

How to Cite

Захарченко, В. П., & Неня, В. Г. (2015). Asystem design of the information model of project management in themanufacturing process. Eastern-European Journal of Enterprise Technologies, 1(3(73), 53–56. https://doi.org/10.15587/1729-4061.2015.37192

Issue

Vol. 1 No. 3(73) (2015): Control processes

Section

Control processes

License

Copyright (c) 2015 Вікторія Петрівна Захарченко, Віктор Григорович Неня

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.