Mathematical modeling of mixing in a coaxial gap

Authors

  • Олександр Сергійович Сахаров National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056, Ukraine
  • Володимир Іванович Сівецький National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056, Ukraine
  • Олександр Леонідович Сокольський National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056, Ukraine
  • Михайло Сергійович Кушнір National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056, Ukraine
  • Світлана Володимирівна Бех National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3732

Keywords:

Coaxial gap, mixing, polymer

Abstract

The mixing of polymers is one of the most effective ways to create materials with given set of properties. The results of studying the interaction of thermoplastic fusions with different concentrations in the mixing zone are offered

Author Biographies

Олександр Сергійович Сахаров, National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056

Doctor of science, professor

Department of chemical, polymeric and silicate engineering

Володимир Іванович Сівецький, National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056

PhD, professor

Department of chemical, polymeric and silicate engineering

Олександр Леонідович Сокольський, National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056

PhD, associate professor

Department of chemical, polymeric and silicate engineering

Михайло Сергійович Кушнір, National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056

Graduate student

Department of the applied fluid dynamics and mechanotronics

 

Світлана Володимирівна Бех, National technical university of Ukraine "Kyiv polytechnical institute" пр. Peremogy 37, corps 19, Kyiv, 03056

Student

Department of the applied fluid dynamics and mechanotronics

References

  1. Киричевский В.В. Нелинейные задачи термомеханики конструкций из слабосжимаемых эластомеров. [Текст] / В. В.Киричевский, А. С.Сахаров – К.: Будівельник, 1992. – 216 с.
  2. Сахаров А.С. Метод конечных элементов в механике твердых тел [Текст] / Под общ. ред. А.С. Сахарова и И.Альтенбаха – К.: Вища школа, 1982. – 480 с.
  3. Власов С.В. Основы технологии переработки пластмасс [Текст] / С.В.Власов, Э.Л.Калинчев, Л.Б. Кандырин и др.: учебник для вузов / под ред. В.Н. Кулезнёва и В. К. Гусева. — М.: Химия, 2004. — 596 с.

Published

2012-04-01

How to Cite

Сахаров, О. С., Сівецький, В. І., Сокольський, О. Л., Кушнір, М. С., & Бех, С. В. (2012). Mathematical modeling of mixing in a coaxial gap. Eastern-European Journal of Enterprise Technologies, 2(5(56), 47–50. https://doi.org/10.15587/1729-4061.2012.3732

Issue

Section

Applied physics