Optimizations of toothed drive of crancles presses on mass

Authors

  • Александр Викторович Явтушенко Zaporozhia national technical university Street Zhukovskogo, 64, Zaporozhia, 69063, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3750

Keywords:

Press, drive, transmission, optimization, transmission relation

Abstract

The method of optimization of toothed drive of crancles presses is resulted on mass. The optimality criteria are defined and the methods for solving the optimization problem are shown. The values of optimum transmission relations of all of the stages of transmission are presented

Author Biography

Александр Викторович Явтушенко, Zaporozhia national technical university Street Zhukovskogo, 64, Zaporozhia, 69063

Candidate of engineerings sciences, associate professor

Department of treatment of metals pressure

References

  1. Кривошипные кузнечно-прессовые машины [Текст] / Под ред. В.И. Власова. — М.: Машиностроение, 1982. — 424 с.
  2. Тынянов В.Н. О проектировании зубчатых приводов с наименьшей массой для кривошипных прессов [Текст] // Кузнечно-штамповочное производство, 1976. № 9. — С. 31-34.
  3. Живов Л.И. Кузнечно-штамповочное оборудование [Текст] / Живов Л.И., Овчинников А.Г., Складчиков Е.Н.; под общ. ред. Л.И. Живова. — М.: Изд-во МГТУ им Н.Э. Баумана, 2006. — 560 с.
  4. Повышение несущей способности механического привода. [Текст] / Под ред. В.Н. Кудрявцева. — Л.: Машиностроение, 1973. — 224 с.
  5. Кудрявцев В.Н. Планетарные передачи. Справочник. [Текст] / под ред. В.Н. Кудрявцева и Ю.Н. Кирдяшева. — Л.: Машиностроение, 1977. — 536 с.
  6. Пантелеев А.В. Методы оптимизации в примерах и задачах. [Текст] / Пантелеев А.В., Летова Т.А. — М.: Высш. шк., 2002. — 544 с.

Downloads

Published

2012-04-01

How to Cite

Явтушенко, А. В. (2012). Optimizations of toothed drive of crancles presses on mass. Eastern-European Journal of Enterprise Technologies, 2(7(56), 8–14. https://doi.org/10.15587/1729-4061.2012.3750

Issue

Vol. 2 No. 7(56) (2012): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Александр Викторович Явтушенко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.