Development of algorithm and computer program for measuring of yarn hairiness

Authors

  • Оксана Васильевна Закора Kherson National Technical University Berislavskoe of highway, 24, was Kherson, Ukraine, 73008, Ukraine
  • Галина Ивановна Липкова Kherson National Technical University Berislavskoe of highway, 24, was Kherson, Ukraine, 73008, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3887

Keywords:

Hairiness, yarn, computer program

Abstract

Program «Poil» is developed for yarn hairiness research by means of a computer method. The program defines yarn hairiness indicators on five gradation of fiber lengths by processing of the scanned images of a yarn

Author Biographies

Оксана Васильевна Закора, Kherson National Technical University Berislavskoe of highway, 24, was Kherson, Ukraine, 73008

Candidate of Technical Sciences, associate professor

Department of examination, technology and design of textiles

Галина Ивановна Липкова, Kherson National Technical University Berislavskoe of highway, 24, was Kherson, Ukraine, 73008

Teacher-probationer

Department of examination, technology and design of textiles

References

  1. Коробова, Т.Н. Формирование алгоритма компьютерной обработки изображения пряжи для измерения показателей ее ворсистости / Т.Н. Коробова [и др.] // Изв. вузов. Технология текстильной промышленности.- 2005.- №2.- С. 109-113.
  2. Липкова Г.І., Закора О.В., Рязанова О.Ю. Дослідження ворсистості змішаної пряжі, яка містить конопляний котонін // Вісник Хмельницького національного університету. – Хмільницький: ХНУ. – 2012.- № 1.– с. 78 – 81.

Downloads

Published

2012-04-01

How to Cite

Закора, О. В., & Липкова, Г. И. (2012). Development of algorithm and computer program for measuring of yarn hairiness. Eastern-European Journal of Enterprise Technologies, 2(10(56), 28–30. https://doi.org/10.15587/1729-4061.2012.3887

Issue

Vol. 2 No. 10(56) (2012): Control systems in the industry

Section

Industry control systems

License

Copyright (c) 2014 Оксана Васильевна Закора, Галина Ивановна Липкова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.