Adaptive control of the temperature mode in the recuperative heating pit

Authors

  • Володимир Олександрович Левченко National Technical University of Ukraine "Kyiv Polytechnic Institute" Victory Avenue 37, Kyiv, Ukraine, 03056, Ukraine
  • Анатолій Павлович Мовчан National Technical University of Ukraine "Kyiv Polytechnic Institute" Victory Avenue 37, Kyiv, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.3889

Keywords:

Recuperative heating pit, adaptive SAR, temperature mode

Abstract

The structure and principle of operation of recuperative heating pit is described. The results of its operations with classical SAR are given. The benefits of control using adaptive SAR is shown

Author Biographies

Володимир Олександрович Левченко, National Technical University of Ukraine "Kyiv Polytechnic Institute" Victory Avenue 37, Kyiv, Ukraine, 03056

Student

Department of Automation cogeneration processes

Анатолій Павлович Мовчан, National Technical University of Ukraine "Kyiv Polytechnic Institute" Victory Avenue 37, Kyiv, Ukraine, 03056

Ph.D., Associate Professor

Department of Automation cogeneration processes

References

  1. Крівандін В.А. Металургійні печі/ В.А. Крівандін, Б.Л. Марков// Металургія - 1977.
  2. Попович М. Г. Теорія автоматичного керування/ Ковальчук О. В.// Либідь,1997. - 544с.
  3. Полищук И.А. Самонастрающийся регулятор для теплоэнергетических процессов /Полищук И.А., Мовчан А.П.// Промышленая теплотехніка, 2007, т.29, №1.

Downloads

Published

2012-04-01

How to Cite

Левченко, В. О., & Мовчан, А. П. (2012). Adaptive control of the temperature mode in the recuperative heating pit. Eastern-European Journal of Enterprise Technologies, 2(10(56), 33–38. https://doi.org/10.15587/1729-4061.2012.3889

Issue

Vol. 2 No. 10(56) (2012): Control systems in the industry

Section

Industry control systems

License

Copyright (c) 2014 Володимир Олександрович Левченко, Анатолій Павлович Мовчан

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.