Developing the intelligent system interface for the design of electronic devices
DOI:
https://doi.org/10.15587/1729-4061.2012.4144Keywords:
intelligent system, circuit components, libraries, integrated database, design, user interface.Abstract
The article offers a solution to the problem of the information support of CAD electronic devices and systems based on the use of intellectual circuit components database systems. The user interface allows to effectively solve the problem of integrating them into the scheme of the device (the system), as well as to the calculation of the parameters of the device (system), charting and reference data obtaining. The solution is proposed by means of creating an intellectual database of electronic components containing full information for all design stages of electronic devices and systems. The user of CAD can effectively solve the issue of selecting the electronic components and obtaining regulatory and reference information in the form of automated project documentation. The research involved using database technologies for the automated design of electronic circuits. Also an intelligent database which accumulates the necessary information on electronic components has been developed. This allows to solve the problem of selecting the needed parts in the ‘tip mode’ in order to properly design electronic circuits.References
- Абу Сара, М.Р. Интегрированные базы данных в программных системах проектирования электронных схем [Текст] / М.Р.Абу Сара, А.И.Ларистов, Ю.Т.Лячек // Материалы 4-й Всероссийской научно-технической конференции «Имитационное моделирование. Теория и практика». - СПб, 2009. - С.60-71.
- Исаков, А.Б. Система автоматизированного формирования базы данных электронных компонентов [Текст] / А.Б.Исаков, К.Б.Скобелицын, Г.К. Скобелицын. - EDA Express, 2001. - № 4. - C. 16.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Николай Александрович Киктев
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
