Numerical and experimental investigation of the centrifugal stage axial compressor centrifugal stationary GTE
DOI:
https://doi.org/10.15587/1729-4061.2012.4187Keywords:
mixed-flow compressor, gas dynamic performances, impeller.Abstract
About increase in efficiency of a centrifugal step of the compressor in low-dimensional GTD with the osetsentrobezhny compressor. Use of the “closed” driving wheel as basic possibility of receiving a highly effective centrifugal step. The gazodinamichesky aspect of its design and manufacturing is considered.References
- Кампсти Н. Аэродинамика компрессоров: Пер. c англ. – М.: Мир, 2000. – 688 c.
- Холщевников К.В., Емин О.Н., Митрохин В. Т. Теория и расчет авиационных лопаточных машин. – М.: Машиностроение, 1986. – 452 с.
- Расчетно-экспериментальное исследование осецентробежного компрессора со специальным профилированием лопаточных венцов / М.А. Шаровский, М.Ю. Шелковский, Е.А. Токарева, А.В. Ивченко // Авиац. – косм. техника и технология. Изд. ХАИ, Харьков – 2010. – №9 (76). – с.34–40.
- Разработка осецентробежного компрессора для энергетического двигателя малой мощности /В.Е. Спицын, М.А. Шаровский, Е.А. Токарева, А.В. Ивченко, М.Ю. Шелковский//Восточно-европейский журнал передовых технологий – 2010. - T. 3, N 2(45).
- Ден Г. Н. Механика потока в центробежных компрессорах / Г. Н. Ден. - Л. : Машиностроение. – 1973. - 272 с.
- CFX-11 Documentation, ANSYS Canada Ltd, Waterloo, Ont, Canada, 2004.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Михаил Антонович Шаровский, Елена Александровна Усатенко, Михаил Юрьевич Шелковский, Инна Аркадьевна Зубрицкая
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
