Energy efficiency of coils heating of traction dynamoelectric machines during acceptance testing
DOI:
https://doi.org/10.15587/1729-4061.2012.4597Keywords:
traction dynamoelectric machine, tests, heating, temperature excess, heat capacity, heat irradiation, power efficiency.Abstract
The research concerns railway transport and devoted to the analysis of heating processes during the testing of the heating of dynamoelectric machines of rolling stock. The aim of the research is the decrease of power consumption for the after-repair acceptable tests of dynamoelectric machines by optimization of loading conditions. The estimation method of power efficiency of heating tests with the help of the index is suggested in the work. It represents the power relation, expended for the temperature increase of armature coil of electric machine, and the relation to the full loss in armature during the testing. The result of the differential equation of armature coil heating was the analytical formula for determination of the coefficient of the heating power efficiency according to the thermal parameters of the tested electric machine. To decrease the total power expenditure it was suggested to hold the test at load current higher than the watch value. It was shown that the increase of load current of tested electric machines to starting value helps to decrease total costs in their armatures almost one and a half time in comparison with the watch mode.References
- ГОСТ 2582-81. Машины электрические вращающиеся тяговые [Текст] / Государственный стандарт СССР. – М.: Изд-во стандартов, 1981. – 50с.
- Захарченко, Д. Д. Тяговые электрические машины и трансформаторы [Текст] / Д. Д. Захарченко, Н. А. Ротанов, Е. В. Горчаков – М.: Транспорт, 1979. – 303 с.
- Правила тяговых расчетов для поездной работы. – М.: Транспорт, 1985. – 287с.
- Розенфельд, В. Е. Теория электрической тяги [Текст] / В. Е. Розенфельд, И. П. Исаев, Н. Н. Сидоров. – М.: Транспорт, 1983. – 328 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Андрей Михайлович Афанасов
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.